[Elecraft] Help - K-3 TMP cables
Thanks, everyone who responded so quickly. I'm sure I'll be able to resolve the problem in the morning . Didn't see the KSYN3A instructions when I looked on the website -- 73, Pete N4ZR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Help - K-3 TMP cables
Pete, Here is the link for the KSYN3A synthesizer installation instructions. See Figure 13 on page 17 for the cable routing for a dual receive K3. https://ftp.elecraft.com/K3S/Manuals%20Downloads/E740257%20KSYN3A%20Installation%20Rev%20A6.pdf 73, Bill - NA5DX On 3/11/2023 4:13 PM, Pete Smith N4ZR wrote: I'm in a bit of a mess. I took my K-3 (S/N 4275) with the sub-RX apart in order to replace Q3, the MOSFET that switches the Key Out jack, which is buried under the sub-RX and the I/O subassemblies. In the process, I managed to pop loose the cable that goes from VCO Out (J84 of the *main* synthesizer board), connecting presumably to somewhere on the big main RX board. But I can't, for the life of me, find an empty TMP jack anywhere on the RF board. Judging by the length and curvature of the orphan cable, it should go somewhere on the left side of the main board, toward the left \, but there's nothing there. The problem is that the updated KSYN3A synthesizers in my K3 were installed at the factory, so I don't have the usual documentation and the units look very different from the originals (my assembly manual only covers the original synthesizers, and also looks much different in the section dealing with the cabling of the synthesizers) Can anyone tell me where that cable is supposed to go? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Help - K-3 TMP cables
I'm in a bit of a mess. I took my K-3 (S/N 4275) with the sub-RX apart in order to replace Q3, the MOSFET that switches the Key Out jack, which is buried under the sub-RX and the I/O subassemblies. In the process, I managed to pop loose the cable that goes from VCO Out (J84 of the *main* synthesizer board), connecting presumably to somewhere on the big main RX board. But I can't, for the life of me, find an empty TMP jack anywhere on the RF board. Judging by the length and curvature of the orphan cable, it should go somewhere on the left side of the main board, toward the left \, but there's nothing there. The problem is that the updated KSYN3A synthesizers in my K3 were installed at the factory, so I don't have the usual documentation and the units look very different from the originals (my assembly manual only covers the original synthesizers, and also looks much different in the section dealing with the cabling of the synthesizers) Can anyone tell me where that cable is supposed to go? -- 73, Pete N4ZR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com