Kim,
That sounds like a bad encoder. Replacement is the only real fix.
It is tough to desolder the tabs, but otherwise not too hard.
73,
Don W3FPR
On 6/13/2020 11:35 AM, Michael K Bottles via Elecraft wrote:
I have a older Factory built K-3 (s/n 3530)
The Power/Compressor/Monitor control is touchy.
It usually works if I turn it very slowly. Turning it at normal speed causes it
to skip up and down in value. This is true for all three of the options
(Pwr/Cmp/Moni).
Is this a known problem? How hard is it to change out the control assuming I
can get another one from Elecraft?
I thought I would ask here before I bother Elecraft Service with the problem in
case it is an easy known fix.
Thanks,
Kim - K7IM
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com