Re: [Elecraft] K1 & K2 Power Plugs
We also sell these 2.1MM power plugs as spare parts on our parts and mod kits order page. See: http://www.elecraft.com/order_form_parts.htm 73, Eric WA6HHQ Elecraft - WA9TGT / Donnie Garrett / Muncie, IN wrote: Does anyone happen to know the Mouser part number for the coaxial power plug used on the K1 & K2 power cable? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K1 & K2 Power Plugs
WA9TGT / Donnie Garrett / Muncie, IN wrote: Does anyone happen to know the Mouser part number for the coaxial power plug used on the K1 & K2 power cable? Switchcraft #S760, Mouser part #502-S-760 Technical specs: ID .080" (2.03mm), assume 2.1mm OD .218" (5.5mm) See NOTE below Barrel Length .375" (9.52mm) Note: Switchcraft does not list a 5.1mm (0.20") diameter barrel coaxial power connector. It appears that ALL of their coaxial pwr connectors are 5.5mm (0.218") in diameter. I used a caliper to confirm the outside diameter of the barrel of the plug I'd received from Elecraft. 0.218" (5.5mm) on the button. For more info on this Switchcraft connector, go to: http://www.switchcraft.com/ and search for "S760". The plug dimension specs are at the bottom of this page, and if you click on selection #2 (760/S760) from the list at the top of the page, you can download a single-page PDF which shows to detailed engineering drawing of the plug, with references which will match to the specs on the page noted above. I believe this to be the power plug which we are using on our K2s and K1s. They ARE better quality than the plugs available from R/S, if for no other reason that the fact that the center cunductor of the Switchcraft plugs is slightly recessed within the insulator, thus making it more difficult to accidently short the positive lead to ground. The apparent R/S equivalent (at least with regard to dimensions, NOT quality) is their 274-1569 (5.5 x 2.1 mm). The apparent DigiKey part #'s are: Plug SC-1052-ND (as Ron has stated) Socket SC-1153-ND (the SC-1155-ND is SMT) NOTE that the 1998 DigiKey catalog from which I got this info had the Switchcraft part #'s for the plug and jack SWITCHED. However the DigiKey web site (www.digikey.com) had everything listed correctly. Users are urged to RETAIN this information for the future when you will surely need it. And WILL eventually need it... almost guaranteed! 73, TomN0SS ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K1 & K2 Power Plugs
The K2 power connector is a Switchcraft S-760, Mouser part number 502-S-760, page 700 in Catalog 619. The companion chassis jack, should you want one, is a Switchcraft 722A, Mouser part number 502-722A. These connectors use a 2.1 MM center pin. - Jim, KL7CC [EMAIL PROTECTED] wrote: Does anyone happen to know the Mouser part number for the coaxial power plug used on the K1 & K2 power cable? Thanks, Don WA9TGT / Donnie Garrett / Muncie, IN ARCI #6447, ARS #1717, AmQRP, ECI-QRP #001 K2 #4003, K2 #3186, K1 #1806, K1 #0416, SW-30+ LDG Z-11 Auto Tuner, 102' CF Zepp fed with 300 Ohm Line ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K1 & K2 Power Plugs
Does anyone happen to know the Mouser part number for the coaxial power plug used on the K1 & K2 power cable? Thanks, Don WA9TGT / Donnie Garrett / Muncie, IN ARCI #6447, ARS #1717, AmQRP, ECI-QRP #001 K2 #4003, K2 #3186, K1 #1806, K1 #0416, SW-30+ LDG Z-11 Auto Tuner, 102' CF Zepp fed with 300 Ohm Line ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
