Would be a bit of a problem switching between the 2 band board and the 4 band
board. Space is
somewhat at a premium inside the K1, especially if you have an autotuner (KAT1)
installed.
These two boards
are piggy-backed above the main PCB. Could possibly be done with some very
custom switching boards
maybe installed on top cover. Interconnect would probably have to be via
ribbon cables from 2 and 4
band PCB's to "switching board"". Also comes the problem of activating the
actual switching
process.
Incorporate it into CPU chip? Just add a seperate 2/4 band pcb switch on rear
apron somewhere?
Even with this, each time it is "switched", you would have to "reassign" bands
again to bands 1 and
2.
It would be "nice" not to have to swap "band" boards but I'll bet the "mod"
would be quite involved.
73,
Sandy W5TVW
- Original Message -
From: "Petr Ouředník" <[EMAIL PROTECTED]>
To:
Sent: Friday, May 12, 2006 5:02 AM
Subject: [Elecraft] K1 s/n 1031 has new home
| Dears,
|
| I am happy to throw up that K1-4 s/n 1031 has the new home in Czech Republic.
Little baby arrived
safely today morning and should be QRV 40/30/20/15m including the KAT1 and KNB1.
|
| Also I would like to many thanks to all who sent me info how to build the
160m band module
specially to Don for complete instructions. I will try to make it asap to be
able to work on my
lovely TOP band soon.
|
| The most interesting idea now for me is how to implement another 2-bands nor
4-bands module
permanently > means to not need swapping the boards when will decide for other
bands. I am totally
confused with the band management in K1 but what could be the problem except
the enough place
inside? Does anybody thought about that please?
|
| I will be happy to make QSO with other "K-syndrom" infected folks.
|
| 72,
|
| OK1RP
| Petr Ouředník
| 00420608230010 (private)
| [EMAIL PROTECTED]
| www.qsl.net/ok1rp
|
| K1 #1031 (40-15m)
| SW20+
| ___
| Elecraft mailing list
| Post to: Elecraft@mailman.qth.net
| You must be a subscriber to post to the list.
| Subscriber Info (Addr. Change, sub, unsub etc.):
| http://mailman.qth.net/mailman/listinfo/elecraft
|
| Help: http://mailman.qth.net/subscribers.htm
| Elecraft web page: http://www.elecraft.com
|
|
|
| --
| No virus found in this incoming message.
| Checked by AVG Free Edition.
| Version: 7.1.392 / Virus Database: 268.5.6/336 - Release Date: 5/10/2006
|
|
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com