Re: [Elecraft] K2 CAT Command Question
Tom, Sorry about the rig type error. I have not tried accessing the K2 with K3 Utility, but I do not think it will work. I would suggest using a terminal application rather than HRD. for those menu changes. Slowing the rate at which HRD polls the radio would be a good thing - HRD really pounds the radio hard with polling commands, so get it out of the way and use something else to manipulate the menus. 73, Don W3FPR On 7/4/2012 7:52 AM, Tom Z wrote: > Don, > > This is a K2, not a K3. Can I use the K3 terminal utility you mentioned? I > am using TeamViewer to remotely access the rig, running HRD with an > FTDI-based USB/serial interface to the K2. > > Unfortunately, I can not get physical access to the rig right now. I am > able to send other commands, such as Get Frequency (FA;). I was hoping my > syntax was wrong or I had the wrong code to change this value. If it is a > link problem, no CW for me for now. > > 73, > > Tom > KG3V > > > On Tue, Jul 3, 2012 at 11:03 PM, Don Wilhelm wrote: > >> Tom, >> >> It may be an HRD problem or a problem with a USB to serial adapter. What >> happens if you issue the command with K3 Utility terminal page. That will >> tell you whether to look toward the K3 for the solution or toward HRD. >> >> Are you running HRD through LP-Bridge? If so, that is another possible >> block. 90% of the K3 commands work through LP-Bridge, but not all - this >> may be one of them (I really don't know, I am just guessing). >> >> 73, >> Don W3FPR >> >> lOn 7/3/2012 10:44 PM, Tom KG3V wrote: >> >>> I am trying to change the "INP" Menu setting on a remotely-operated K2. >>> It is >>> currently in the Paddle-reverse mode, and I need to change it to HAND. >>> Looking at the K2 Programmer's Reference Manual, It looks like I can send >>> "SW41;UP;" or "SW41;SW01;" to do this. When I send these commands using >>> Han >>> Radio Deluxe, I get an [error] returned and the value does not change. >>> >>> Can anyone see a mistake in my commands? Probably missing something >>> obvious. >>> >>> > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 CAT Command Question
Don, This is a K2, not a K3. Can I use the K3 terminal utility you mentioned? I am using TeamViewer to remotely access the rig, running HRD with an FTDI-based USB/serial interface to the K2. Unfortunately, I can not get physical access to the rig right now. I am able to send other commands, such as Get Frequency (FA;). I was hoping my syntax was wrong or I had the wrong code to change this value. If it is a link problem, no CW for me for now. 73, Tom KG3V On Tue, Jul 3, 2012 at 11:03 PM, Don Wilhelm wrote: > Tom, > > It may be an HRD problem or a problem with a USB to serial adapter. What > happens if you issue the command with K3 Utility terminal page. That will > tell you whether to look toward the K3 for the solution or toward HRD. > > Are you running HRD through LP-Bridge? If so, that is another possible > block. 90% of the K3 commands work through LP-Bridge, but not all - this > may be one of them (I really don't know, I am just guessing). > > 73, > Don W3FPR > > lOn 7/3/2012 10:44 PM, Tom KG3V wrote: > >> I am trying to change the "INP" Menu setting on a remotely-operated K2. >> It is >> currently in the Paddle-reverse mode, and I need to change it to HAND. >> Looking at the K2 Programmer's Reference Manual, It looks like I can send >> "SW41;UP;" or "SW41;SW01;" to do this. When I send these commands using >> Han >> Radio Deluxe, I get an [error] returned and the value does not change. >> >> Can anyone see a mistake in my commands? Probably missing something >> obvious. >> >> > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 CAT Command Question
Tom, It may be an HRD problem or a problem with a USB to serial adapter. What happens if you issue the command with K3 Utility terminal page. That will tell you whether to look toward the K3 for the solution or toward HRD. Are you running HRD through LP-Bridge? If so, that is another possible block. 90% of the K3 commands work through LP-Bridge, but not all - this may be one of them (I really don't know, I am just guessing). 73, Don W3FPR lOn 7/3/2012 10:44 PM, Tom KG3V wrote: > I am trying to change the "INP" Menu setting on a remotely-operated K2. It is > currently in the Paddle-reverse mode, and I need to change it to HAND. > Looking at the K2 Programmer's Reference Manual, It looks like I can send > "SW41;UP;" or "SW41;SW01;" to do this. When I send these commands using Han > Radio Deluxe, I get an [error] returned and the value does not change. > > Can anyone see a mistake in my commands? Probably missing something obvious. > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K2 CAT Command Question
I am trying to change the "INP" Menu setting on a remotely-operated K2. It is currently in the Paddle-reverse mode, and I need to change it to HAND. Looking at the K2 Programmer's Reference Manual, It looks like I can send "SW41;UP;" or "SW41;SW01;" to do this. When I send these commands using Han Radio Deluxe, I get an [error] returned and the value does not change. Can anyone see a mistake in my commands? Probably missing something obvious. 73, Tom, KG3V -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-CAT-Command-Question-tp7558597.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
