Barry,
Check the soldering for the LCD display pins. I would also check
continuity on Front Panel U1 to the display pins. Should you find any
that do not have continuity, do not lift the LCD to reflow the solder,
instead, carve a notch in the socket and solder it from on the socket side.
73,
Don W3FPR
On 11/21/2020 5:15 AM, Barry Middleton via Elecraft wrote:
Good morning, I would like some help in resolving a problem with my K2.
The rig is receiving and transmitting
with no problem, but the indicator for LSB, USB, CW etc is not working.
I am able to change mode ok but have to rely
on my ears to tell me witch mode I am on. On the display I see one
vertical bar, press mode button mode changes
and the display shows two vertical bars. Is this a display fault or
should I look somewhere else?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com