Mike,
Yes, ignore that inductor change. The inductor necessary depends a lot on
the crystal that shipped with your kit, and the proper value has changed
from 10 uH to 12 uH and back a few times over the life of the K2. Put in
the 10 uH (or re-use the one that is currently installed) and wait until you
do the PLL range test before becoming concerned.
Also relevant - check th eElecraft Builder's Resource Page on the Elecraft
website and you will see a new note stating that a PLL range of 8.8 to 18
kHz is an acceptable range.
73,
Don W3FPR
-Original Message-
I recently purchased the K2 PLL Temp Comp mod kit, and it came with Rev
D (3 Feb 04) instructions. A couple places in the instructions mention
replacing L31 (originally 10uH, which my rig has) with a 12 uH inductor.
Yet the parts list states it should be a 10 uH, and I was shipped a 10 uH.
Which is right? Considering the instruction sheet is over a year old, I
would have thought any typos would have been caught by now.
--
73,
Mike Boice, KW1ND
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
