Re: [Elecraft] K2 Push To Talk
Lloyd One option for the K2/transverter hot switching problem on CW is to build a sequencer which breaks the TX IF line, like this one: http://www.qsl.net/ve3sma/3OutputSequencerForK2.pdf This only works, however, if you are running very low IF power from the K60XV (or at least run the 10W TX IF through an attenuator so the K2 PA sees a decent match at all times). 73, Steve VE3SMA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 Push To Talk
Another solution for this, at least for CW, is to get a WinKeyerUSB. Those have two outputs, a PTT and a Key line. There is a variable, programmable, delay between when PTT is activated and when the Key line becomes active. I use the PTT to key my amp and 30 mS later key the K2. The delay can be made very long, up to at least 990 mS, in 10 mS increments. 73 de dave ab9ca/4 On 1/24/14 11:43 PM, Don Wilhelm wrote: Lloyd, If you don't like my fix for this situation, you can use a footswitch to activate your amp and switch your preamp off-line before hitting the paddles - just don't make any mistakes and get things in the wrong order. I have not seen anything comparable to my solution. It was intended specifically for those using VHF gear with the K2. 73, Don W3FPR On 1/24/2014 11:12 PM, Lloyd Korb wrote: Has anyone come up with a simple fix to add an external PTT line to the K2? I recently picked up a used K2 and just completed building a 222 transverter. I didn't realize that the K2 does not have a Transmit/Receive switch. So, I will be hot switching, in CW mode. WSJT is not a problem as there is a built in delay between when PTT and audio is outputted. An external sequencer won't help as I can't get control of the K2 PTT line in CW mode. Any ideas besides W3FPR's fix? http://www.w3fpr.com/ptt_input_for_the_elecraft_k2.htm Thanks, __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 Push To Talk
Lloyd, If you don't like my fix for this situation, you can use a footswitch to activate your amp and switch your preamp off-line before hitting the paddles - just don't make any mistakes and get things in the wrong order. I have not seen anything comparable to my solution. It was intended specifically for those using VHF gear with the K2. 73, Don W3FPR On 1/24/2014 11:12 PM, Lloyd Korb wrote: Has anyone come up with a simple fix to add an external PTT line to the K2? I recently picked up a used K2 and just completed building a 222 transverter. I didn't realize that the K2 does not have a Transmit/Receive switch. So, I will be hot switching, in CW mode. WSJT is not a problem as there is a built in delay between when PTT and audio is outputted. An external sequencer won't help as I can't get control of the K2 PTT line in CW mode. Any ideas besides W3FPR's fix? http://www.w3fpr.com/ptt_input_for_the_elecraft_k2.htm Thanks, __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K2 Push To Talk
Has anyone come up with a simple fix to add an external PTT line to the K2? I recently picked up a used K2 and just completed building a 222 transverter. I didn't realize that the K2 does not have a Transmit/Receive switch. So, I will be hot switching, in CW mode. WSJT is not a problem as there is a built in delay between when PTT and audio is outputted. An external sequencer won't help as I can't get control of the K2 PTT line in CW mode. Any ideas besides W3FPR's fix? http://www.w3fpr.com/ptt_input_for_the_elecraft_k2.htm Thanks, Lloyd K8DIO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html