John,
Those two capacitors would cause you to have trouble getting a signal
through the bandpass on 80 and on 40 meters.
Yes, 56pf is labeled 560 and 560pf is labeled 561 - 82pf is labeled 820
while 820pf is labeled 821.
Since you installed the incorrect capacitors in C12 and C4, the further part
of the mystery must be 'where are the 560pf and 820pf capacitors
installed?' - these may cause further trouble unless located and changed to
the correct values. The parts list can be a valuable guide in checking
where each value capacitor should be located.
73,
Don W3FPR
> -Original Message-
>
> The saga continues.
> I am in the middle of building my very first breadboard project: a 10
> MHz oscillator to test the K2. Got about half of the parts from
> Radio Shack. Got the XTAL and a few other parts at Hosfelt Electronics.
>
> For the Don,
> I found two caps that were wrong in the bandpass area:
> C12 was labelled 560 and should be 561 and
> C4 was labelled 820 and should be 821
>
> These appear to be order of magnitude differences so I HOPE their
> correction leads me on.
>
> I remember correcting myself during the build : 560 is 561 ... 820
> is 821.
>
> Can Someone (I don't know who...could it be DON?!) confirm that the
> above is correct and makes sense?
>
> If so, I'll order more caps.
>
> Thanks again for all the help
> (and everyone's patience with what is becoming a record-breaking thread)
>
> John
> AB8WH
>
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
