Re: [Elecraft] K3: Power not restored when swapping A/B and back

[Joe Planisky]

Hi Martin,

> To restore PWR i need to crank up the PWR-knob from Milliwatts to high
> PWR or use PFx.

Are you saying that CONFIG:PWR SET = PER-BAND is not working in that  
situation?

> Other observation: When i switch on TEXT DECODE in CW, the AGC acts
> slower. Is this intended?

Yes.  See page 33 in the manual, section titled "CW Text Decode Tips".

73
--
Joe KB8AP

On Feb 15, 2010, at 2:23 PM, DM4iM wrote:

> Elecrafters,

> ...

> Martin
>
> -- 
>
> 73, DM4iM
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3: Power not restored when swapping A/B and back

[DM4iM]

Elecrafters,
I intend to hook up an external XVTR, so i tried this: I set one VFO to
a 2m-frequency and PWR to the Milliwatt-range, set the other VFO to a
shortwave band and PWR to - say - 100 Watts, then swap A/B to make the
shortwave band VFO B and 2m VFO A.
When swapping the shortwave band back to A, the high PWR is not
restored. Holding XMIT outputs the preset PWR, 10 Watts in my case.
To restore PWR i need to crank up the PWR-knob from Milliwatts to high
PWR or use PFx.


FW 3.76
KXV3A
No Tuner

Other observation: When i switch on TEXT DECODE in CW, the AGC acts
slower. Is this intended? I can't speak for other modes, i haven't tried
yet.

Martin

-- 

73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html