[Elecraft] K3: Sudden problem on 160M

[WA6L]

I have had K3 S/N 611 on the air for over a month with no issues and a ton
of fun.  However, this week I have run into a strange problem,

On the 160M band with CW selected, there are a number of chunks of the
band that I can't transmit on.  I can transmit on 1808 for example, but when
I go to 1810 I get the END message when I try to transmit.  Then, 1812
works FB.  This goes up the band with perhaps a dozen small segments where I
cannot transmit.

It appears to be some sort of firmware issue, though I can't be 100% sure. 
So I guess my first question is whether this warrants a reset or a relaod of
the firmware?  Anyone run into this before?

Thanks,

John, WA6L

-- 
View this message in context: 
http://www.nabble.com/K3%3A-Sudden-problem-on-160M-tp16995266p16995266.html
Sent from the Elecraft mailing list archive at Nabble.com.

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3: Sudden problem on 160M

[Lee Buller]

I cannot reproduce this on SN443 into a 100 watt dumby load 10 1808, 1810, or 
1812.  Transmits at 100 watts.

Lee - K0WA



In our day and age it seems that Common Sense is in short supply.  If you don't 
have any Common Sense - get some Common Sense and use it.  If you can't find 
any Common Sense, ask for help from somebody who has some Common Sense.  Is 
Common Sense divine?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com