Hi All, Happy New Year 2010.
I own an early K3 that I purchased in Feb 2008 without the KXV3 option. As I was planning to purchase the LP-Pan for the K3, I recalled reading back then that obtaining a signal form the K3 for the LP-Pan could be achieved without the KXV3 option installed. So I purchased from Elecraft the KXV3A TMP Cable Assembly Part# E850292 planning to route that coaxial cable TMP from the KXV3A blank panel on the back of my K3 to connector P86 on the bottom of the RF board as shown in Figure 11 of the KXV3 manual. I was then planning to terminate the TMP into BNC connector into a hole that I would drill in the blank KXV3 panel escutcheon on the back of the K3. By the time I got around to the LP-Pan project the P3 was announced so I never followed through on this process. So why wouldn't this work as an alternative to buying an entire KXV3 which I have no other need to use? Am I missing something else that the KXV3 is doing to the IF signal for interfacing with the upcoming P3. Thanks for any thoughts. 73 de N1LQ-Dave ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html