Re: [Elecraft] K3 + P3 Combo Pelican / Hard Case
I use a Canadian made case that is similar to the pelican very strong and well made by Nanuk I have a bright orange 940 it will hold the K3 and P3 just fine with room in the lid for a laptop.I dont have the P3 yet so I use the space available for PSU headphones key and cables etc. I will get a smaller case for the accessories when I buy the P3. I made my own foam padding but you can get foam padding similar to the Pelican. -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-P3-Combo-Pelican-Hard-Case-tp7581259p7582228.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + P3 Combo Pelican / Hard Case
The Pelican 1500 is just a bit too short to hold a K3 + a P3. (I tried it.) I have used Pelican cases to carry cameras into caves for many years. If you don't worry too much about the finish on the cameras and other photo gear, just pack them in tightly with the case's foam around the outside and they will survive being banged around, dropped, sat on etc. Probably radios will also survive with the possibility of loosened connectors if the case is banged around, for example by airline luggage handlers. Cheers - Bill, AE6JV On 11/29/13 at 9:16 PM, k2...@polyphase.ca (Alan Hawrylyshen) wrote: More than anything - I'm interested in opinions around how much space is needed to protect the radio, etc. --- Bill Frantz| I don't have high-speed | Periwinkle (408)356-8506 | internet. I have DSL.| 16345 Englewood Ave www.pwpconsult.com | | Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + P3 Combo Pelican / Hard Case
I put my K3 into a large food box I bought for a few £ from Morrisons supermarket. It has a tight-fitting lid and the K3 is held snugly in place and everything is protected. I carry this my shoulder bag. The box is polypropylene I think and is soft enough to absorb knocks on the corners. I haven't done a drop test, but I think it would be fine for travelling. In a shoulder bag it would be surrounded by other materials and is good for carry-on. I haven't tried the P3 in a food box, but I'm sure I'd find one, even another of the same as the K3 filled with stuff like your bug key, headphones, etc. I know it's not quite what you asked for but I think this is a superior solution and the cost is negligible. David G3UNA - Original Message - From: Alan Hawrylyshen k2...@polyphase.ca To: elecraft elecraft@mailman.qth.net Sent: Saturday, November 30, 2013 5:16 AM Subject: [Elecraft] K3 + P3 Combo Pelican / Hard Case I have looked at the archives a little bit, but I haven't quite stumbled on a short and sweet paragraph or two about this. Has anyone selected and used a Pelican case to protect and transport a K3/100 + P3 combo. If so, what case did you choose? I've been looking at the 15xx (1550) and possibly the iM2500 cases; but they are quite 'tight' dimensionally. I'm interested in any experiences people have with: 1) Pelican Cases for a K3/100+P3 combo (I mention /100 because of the fans hanging back), and/or; 2) Experience with a similar but potentially less expensive option. I'd like to pack my radio up for the trip to G-land and select a case that would allow me to take the radio on a DXpedition at some point -- so an option is to expand the case size to include the power supply, etc. More than anything - I'm interested in opinions around how much space is needed to protect the radio, etc. Thanks Alan K2ACK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 + P3 Combo Pelican / Hard Case
I have looked at the archives a little bit, but I haven't quite stumbled on a short and sweet paragraph or two about this. Has anyone selected and used a Pelican case to protect and transport a K3/100 + P3 combo. If so, what case did you choose? I've been looking at the 15xx (1550) and possibly the iM2500 cases; but they are quite 'tight' dimensionally. I'm interested in any experiences people have with: 1) Pelican Cases for a K3/100+P3 combo (I mention /100 because of the fans hanging back), and/or; 2) Experience with a similar but potentially less expensive option. I'd like to pack my radio up for the trip to G-land and select a case that would allow me to take the radio on a DXpedition at some point -- so an option is to expand the case size to include the power supply, etc. More than anything - I'm interested in opinions around how much space is needed to protect the radio, etc. Thanks Alan K2ACK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + P3 Combo Pelican / Hard Case
Hi Alan, I used a Pelican 1610. I think I paid about $170 about 4 or 5 years ago. It holds the K3 and P3 side by side with a good amount of padding all around. There was enough room behind the P3 to put a small Gamma Research PS in there also. I bought the lid option to store a whole bunch of stuff (connectors, wire, cabling etc.) and a couple of manuals. There is also a layer of foam that sits on top of the K3 and P3 that I made cut outs for a number of tools and a meter. Hope this helps. 73, Dave W8FGU On 11/30/2013 12:16 AM, Alan Hawrylyshen wrote: I have looked at the archives a little bit, but I haven't quite stumbled on a short and sweet paragraph or two about this. Has anyone selected and used a Pelican case to protect and transport a K3/100 + P3 combo. If so, what case did you choose? I've been looking at the 15xx (1550) and possibly the iM2500 cases; but they are quite 'tight' dimensionally. I'm interested in any experiences people have with: 1) Pelican Cases for a K3/100+P3 combo (I mention /100 because of the fans hanging back), and/or; 2) Experience with a similar but potentially less expensive option. I'd like to pack my radio up for the trip to G-land and select a case that would allow me to take the radio on a DXpedition at some point -- so an option is to expand the case size to include the power supply, etc. More than anything - I'm interested in opinions around how much space is needed to protect the radio, etc. Thanks Alan K2ACK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
