[Elecraft] K3 - configure RX/TX equalizer using macros
To all who are missing a easy way to configure the RX/TX equalizer. Based on the available tools i would use the Macros to set the RX/TX equalizer for different needs. An short example (pls don't type in the comments...): AI0;no response K31;is needed to use the SWT command MN008; or 009 to select RX / TX equalizer SWT53; tab CLR => set all values to 0dB SWT11; tab A/B => select first frequency 11 A/B (1) => select 50 Hz 12 REV (2) => select 100 Hz 13 A>B (3) => select 200 Hz 24 PRE (4) => select 400 Hz 27 AGC (5) => select 800 Hz 29 XFIL (6) => select 1200 Hz 33 NB (7) => select 2400 Hz 34 NR (8) => select 3200 Hz UP; to set +1 dB or up to 16 times each !! DN; to set -1 dB MN255; exit the menu K30;back to default (optional) This one will set TX-EQ to -3/-2/0/0/0/+2/+3/+3 (this is only an example... pls don't ask why) AI0;K31;MN009;SWT53;SWT11;DN;DN;DN;SWT12;DN;DN;SWT29;UP;UP;SWT33;UP;UP;UP;SW T34;UP;UP;UP;MN255;K30; 73 Thomas, DM7TN K3/100 #78 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 - configure RX/TX equalizer using macros
I was just about to post comments about the implementation of the RX EQualiser when I came across Thomas's post below. I'm now using the elecraft k3 utility program (command tester) to hop quickly between RX EQ settings on the K3brilliant, thanks! Here are some cw suggestions to try: CW RX FLAT AI0;K31;MN008;SWT53;MN255;K30; CW RX 400Hz AI0;K31;MN008;SWT53;SWT24;DN;DN;SWT27;UP;UP;UP;SWT29;DN;DN;DN;DN;DN;MN255;K30; CW RX 1000Hz AI0;K31;MN008;SWT53;SWT12;DN;DN;DN;SWT13;DN;DN;SWT24;DN;SWT27;UP;UP;UP;SWT29;DN;DN;DN;DN;DN;MN255;K30; The 400/1000 (bandwidth) settings both peak the audio response for pitch settings in the 700-800Hz range and have the effect of 'brightening' any cw sig in that window. You can then switch back to FLAT to quickly compare the difference. I mainly use CW and am interested in what RX EQ settings everyone else is using. 73 Doug GM0ELP -- View this message in context: http://n2.nabble.com/K3configure-RX-TX-equalizer-using-macros-tp465559p684019.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com