Re: [Elecraft] K3 - KIO3B setup
Got it working. W3FPR suggested downloading the FTID driver from the Elecraft site. Everything is now working with the USB hookup - LP-Bridge, K3, P3, KPA-500 (remote), SteppIR, DXBase, N1MM, AXETTY, MTTY. Tnx for all the input. N2TK, Tony -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of N2TK, Tony Sent: Thursday, February 11, 2016 7:04 PM To: w3...@embarqmail.com; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 - KIO3B setup Hi Don, When I moved the USB cable to the front of the PC I get the following in Device Manager. two USB ports added - "Generic USB Hub" and "USB Composit Device" A new category - "Other devices" with a question mark. Under that it shows "FT232R USB UART" with a question mark. Do not see anything added referencing a COM port under "Ports (COM & LPT)" Running Win 7 Pro on a HP Z220 workstation. I also have a USB to 8-port RS232 hub. N2TK, Tony -Original Message- From: Don Wilhelm [mailto:w3...@embarqmail.com] Sent: Thursday, February 11, 2016 5:32 PM To: N2TK, Tony ; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 - KIO3B setup Tony, The USB "adapter" in the K3 must be defined as a USB COM port by your computer. It should be no different than adding a USB to serial adapter (because that is what is inside the KIO3B). I suspect that "USB Composite Device" is what you might be looking for - is there a COM Port number associated with it? That kind of stuff is computer dependent. If you did not obtain anything reasonable, unplug the USB cable from the computer and try another USB port. Wait until the computer indicates that the device is ready to use. I know that works on Windows 7 and Windows 10 (should work in Win8). If you are using XP, that may get a bit 'dicey' and you may have to explicitly load the FTDI driver. Once you know the COM port that the computer has assigned, just tell LP-Bridge to use that COM port. 73, Don W3FPR On 2/11/2016 4:39 PM, N2TK, Tony wrote: > I tried installing the USB cable from the K3 to the PC. The only thing > that happens is that in Device Manager >Universal Serial Bus > Controllers it show two USB ports added - Generic USB Hub and USB > Composite Device. What do I do next? > How do I get this tied into LP-Bridge as before as there is nothing > showing on LP-Bridge how to handle USB connections? > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tony@verizon.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - KIO3B setup
Hi Don, When I moved the USB cable to the front of the PC I get the following in Device Manager. two USB ports added - "Generic USB Hub" and "USB Composit Device" A new category - "Other devices" with a question mark. Under that it shows "FT232R USB UART" with a question mark. Do not see anything added referencing a COM port under "Ports (COM & LPT)" Running Win 7 Pro on a HP Z220 workstation. I also have a USB to 8-port RS232 hub. N2TK, Tony -Original Message- From: Don Wilhelm [mailto:w3...@embarqmail.com] Sent: Thursday, February 11, 2016 5:32 PM To: N2TK, Tony ; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 - KIO3B setup Tony, The USB "adapter" in the K3 must be defined as a USB COM port by your computer. It should be no different than adding a USB to serial adapter (because that is what is inside the KIO3B). I suspect that "USB Composite Device" is what you might be looking for - is there a COM Port number associated with it? That kind of stuff is computer dependent. If you did not obtain anything reasonable, unplug the USB cable from the computer and try another USB port. Wait until the computer indicates that the device is ready to use. I know that works on Windows 7 and Windows 10 (should work in Win8). If you are using XP, that may get a bit 'dicey' and you may have to explicitly load the FTDI driver. Once you know the COM port that the computer has assigned, just tell LP-Bridge to use that COM port. 73, Don W3FPR On 2/11/2016 4:39 PM, N2TK, Tony wrote: > I tried installing the USB cable from the K3 to the PC. The only thing > that happens is that in Device Manager >Universal Serial Bus > Controllers it show two USB ports added - Generic USB Hub and USB > Composite Device. What do I do next? > How do I get this tied into LP-Bridge as before as there is nothing > showing on LP-Bridge how to handle USB connections? > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - KIO3B setup
Tony, The USB "adapter" in the K3 must be defined as a USB COM port by your computer. It should be no different than adding a USB to serial adapter (because that is what is inside the KIO3B). I suspect that "USB Composite Device" is what you might be looking for - is there a COM Port number associated with it? That kind of stuff is computer dependent. If you did not obtain anything reasonable, unplug the USB cable from the computer and try another USB port. Wait until the computer indicates that the device is ready to use. I know that works on Windows 7 and Windows 10 (should work in Win8). If you are using XP, that may get a bit 'dicey' and you may have to explicitly load the FTDI driver. Once you know the COM port that the computer has assigned, just tell LP-Bridge to use that COM port. 73, Don W3FPR On 2/11/2016 4:39 PM, N2TK, Tony wrote: I tried installing the USB cable from the K3 to the PC. The only thing that happens is that in Device Manager >Universal Serial Bus Controllers it show two USB ports added - Generic USB Hub and USB Composite Device. What do I do next? How do I get this tied into LP-Bridge as before as there is nothing showing on LP-Bridge how to handle USB connections? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - KIO3B setup
I tried installing the USB cable from the K3 to the PC. The only thing that happens is that in Device Manager >Universal Serial Bus Controllers it show two USB ports added - Generic USB Hub and USB Composite Device. What do I do next? How do I get this tied into LP-Bridge as before as there is nothing showing on LP-Bridge how to handle USB connections? Tnx for any input. N2TK, Tony -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of N2TK, Tony Sent: Monday, January 18, 2016 4:25 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 - KIO3B setup I installed the KIO3B kit. I have it set up as the original KIO3 - K3- RS232 to P3 to PC/SteppIR. Accessory plug with FSK interface and audio in and out cables to audio board. I use LP-Bridge. Everything is working fine as it was before the upgrade. Now I want to take advantage of the features of the KIO3B kit. I have the CBLP3Y cable for the K3 to the P3. I will replace the RS232 with the USB to the PC. I will remove the audio in and out cables. Is there anything special I need to do now that I will be using a USB port instead of the RS232? What about with LP-Bridge? Anything I need to do with it? Where is the best place to hook up the SteppiR now that I don't have an RS232 connecting to the PC? Tnx for any feedback. 73, N2TK, Tony __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tony@verizon.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - KIO3B setup
Well, first, I don’ recognize the CBLP3T cable. Maybe you meant CBLP3Y? If so, I think yu would still need a DE-9 “Y” cable to connect at the P3 at which ever port you used before (TXCVR or PC). Be sure to set CONFIG:RS-232 to USB and not 38400 as before. And now your audio input/output is the new USB CODEC. Have fun and let us know how it works. …bc nr4c > On Jan 18, 2016, at 4:24 PM, N2TK, Tony wrote: > > I installed the KIO3B kit. I have it set up as the original KIO3 - K3- RS232 > to P3 to PC/SteppIR. Accessory plug with FSK interface and audio in and out > cables to audio board. I use LP-Bridge. Everything is working fine as it was > before the upgrade. > > Now I want to take advantage of the features of the KIO3B kit. > > > > I have the CBLP3T cable for the K3 to the P3. > > I will replace the RS232 with the USB to the PC. > > I will remove the audio in and out cables. > > > > Is there anything special I need to do now that I will be using a USB port > instead of the RS232? > > What about with LP-Bridge? Anything I need to do with it? > > Where is the best place to hook up the SteppiR now that I don't have an > RS232 connecting to the PC? > > > > Tnx for any feedback. > > 73, > > N2TK, Tony > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 - KIO3B setup
I installed the KIO3B kit. I have it set up as the original KIO3 - K3- RS232 to P3 to PC/SteppIR. Accessory plug with FSK interface and audio in and out cables to audio board. I use LP-Bridge. Everything is working fine as it was before the upgrade. Now I want to take advantage of the features of the KIO3B kit. I have the CBLP3T cable for the K3 to the P3. I will replace the RS232 with the USB to the PC. I will remove the audio in and out cables. Is there anything special I need to do now that I will be using a USB port instead of the RS232? What about with LP-Bridge? Anything I need to do with it? Where is the best place to hook up the SteppiR now that I don't have an RS232 connecting to the PC? Tnx for any feedback. 73, N2TK, Tony __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com