Re: [Elecraft] K3 - Sensitivity drop between Low and Hi power
Seems I've found the problem but I should wait till monday to try to fix it. As suggested by Gary at Elecraft I've checked some components and I found Q9 on the KPA3 board broken. I think Q9 is both responsible of the power instability I've found and the drop in a S point when KPA3 was enabled. I'll let the list know. Max IW0GXY Vic K2VCO wrote: max iw0gxy wrote: Hi all, I connected the XG2 signal generator to my K3 and I've injected 50microV into the antenna. I have the standard S9 but when I rise the power to 13 and up signal drop down to S8. If I turn the knob to 12W or less signal turn back to S9. I've noted this behavior on signals on air but to be sure I've used my signal generator. I do not see any change in received signal levels here when switching between low and high power. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://www.nabble.com/K3---Sensitivity-drop-between-Low-and-Hi-power-tp18165769p18171938.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - Sensitivity drop between Low and Hi power
Hi all, I connected the XG2 signal generator to my K3 and I've injected 50microV into the antenna. I have the standard S9 but when I rise the power to 13 and up signal drop down to S8. If I turn the knob to 12W or less signal turn back to S9. I've noted this behavior on signals on air but to be sure I've used my signal generator. Did someone noted the same behavior? Max IW0GXY -- View this message in context: http://www.nabble.com/K3---Sensitivity-drop-between-Low-and-Hi-power-tp18165769p18165769.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 - Sensitivity drop between Low and Hi power
max iw0gxy wrote: Hi all, I connected the XG2 signal generator to my K3 and I've injected 50microV into the antenna. I have the standard S9 but when I rise the power to 13 and up signal drop down to S8. If I turn the knob to 12W or less signal turn back to S9. I've noted this behavior on signals on air but to be sure I've used my signal generator. I do not see any change in received signal levels here when switching between low and high power. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com