Re: [Elecraft] K3 Beta Firmware, Revision 2.31 E 00000C ERR DSE
Awesome, glad to hear it is up and running. David Wilburn K4DGW www.k4dgw.com Christopher Kovacs wrote: Looks like it was my mistake I could have swore that the DSP was being loaded the first time. I went back to the previous firmware and then reloaded the latest beta firmware making sure that I send "all". It's good now. Chris w0anm David Wilburn wrote: Same firmware here. Set pitch to 630 Width to .80 Varied shift from lowest setting to highest without issues. There were two loads that needed to be added for this firmware. Did you add the DSP as well as the MCU? David Wilburn K4DGW www.k4dgw.com www.k4rc.net Williamsburg Area Amateur Radio Club (K4RC) My Current LOTW/DXCC/WAS status www.k4dgw.com/WAS.DXCC.info.html Christopher Kovacs wrote: Hi all, I just upgraded to the latest beta. Set pitch to 630 and then varied the "WIDTH" and SHIFT". Set the WIDTH for 0.80 then when shifting passed FC 0.35, the receiver dies with an error "E 0C" ERR DSE. It doesn't appear to matter what the "pitch" tone is set. After the error occurs, you must change the SHIFT setting > 0.35 and power off and on. Chris W0ANM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Beta Firmware, Revision 2.31 E 00000C ERR DSE
Looks like it was my mistake I could have swore that the DSP was being loaded the first time. I went back to the previous firmware and then reloaded the latest beta firmware making sure that I send "all". It's good now. Chris w0anm David Wilburn wrote: Same firmware here. Set pitch to 630 Width to .80 Varied shift from lowest setting to highest without issues. There were two loads that needed to be added for this firmware. Did you add the DSP as well as the MCU? David Wilburn K4DGW www.k4dgw.com www.k4rc.net Williamsburg Area Amateur Radio Club (K4RC) My Current LOTW/DXCC/WAS status www.k4dgw.com/WAS.DXCC.info.html Christopher Kovacs wrote: Hi all, I just upgraded to the latest beta. Set pitch to 630 and then varied the "WIDTH" and SHIFT". Set the WIDTH for 0.80 then when shifting passed FC 0.35, the receiver dies with an error "E 0C" ERR DSE. It doesn't appear to matter what the "pitch" tone is set. After the error occurs, you must change the SHIFT setting > 0.35 and power off and on. Chris W0ANM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Beta Firmware, Revision 2.31 E 00000C ERR DSE
Same firmware here. Set pitch to 630 Width to .80 Varied shift from lowest setting to highest without issues. There were two loads that needed to be added for this firmware. Did you add the DSP as well as the MCU? David Wilburn K4DGW www.k4dgw.com www.k4rc.net Williamsburg Area Amateur Radio Club (K4RC) My Current LOTW/DXCC/WAS status www.k4dgw.com/WAS.DXCC.info.html Christopher Kovacs wrote: Hi all, I just upgraded to the latest beta. Set pitch to 630 and then varied the "WIDTH" and SHIFT". Set the WIDTH for 0.80 then when shifting passed FC 0.35, the receiver dies with an error "E 0C" ERR DSE. It doesn't appear to matter what the "pitch" tone is set. After the error occurs, you must change the SHIFT setting > 0.35 and power off and on. Chris W0ANM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Beta Firmware, Revision 2.31 E 00000C ERR DSE
Hi all, I just upgraded to the latest beta. Set pitch to 630 and then varied the "WIDTH" and SHIFT". Set the WIDTH for 0.80 then when shifting passed FC 0.35, the receiver dies with an error "E 0C" ERR DSE. It doesn't appear to matter what the "pitch" tone is set. After the error occurs, you must change the SHIFT setting > 0.35 and power off and on. Chris W0ANM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com