K3 beta-test firmware revision 4.14 is now available. The most
important change is to the behavior of the A/B and REV switches when
the K3 is used with a P3. (See release notes below.) You'll also need
to install revision 0.36 or later of P3 firmware, if you haven't
already.
Please send any questions to k3supp...@elecraft.com. For instructions
on how to load beta firmware, see:
http://www.elecraft.com/K3/k3_software.htm
73,
Wayne
N6KR
* * *
MCU 4.14 / DSP 2.60 / FPF 1.13, 10-6-2010
* P3 UPDATED CORRECTLY ON K3 "A/B" SWITCH PRESS.
* P3 FUNCTIONS CORRECTLY AFTER "REV" SWITCH PRESS:
Previously, holding REV at the K3 would cause the P3 to stop
tracking K3 VFO movement. Note: At present, holding REV
does not result in any change in the P3 display. This will be
changed in a future revision of K3 firmware.
* BN REMOTE CONTROL COMMAND (BAND CHANGE):
This command now changes bands more quickly.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
