On 6 Jan 2010 at 21:24, Gary Smith wrote:
Out of curiosity I looked at some of the other tabs on the K3 utility
like configuration calibration. All the buttons there were greyed
out. I went back to the Ports tab deselected port 3 as mentioned
below told it to select port 6 and then it recognized the existing
version said 4800 bps instead of 38400 bps
I again tried to have the utility update the new firmware and it did
so as expected.
Interesting but it's worth remembering if someone encounters this
issue themselves.
Cheers,
Gary
KA1J
Hi,
I started the K3 utility and port 3 is connected at 38400 bps.
I just downloaded the most recent beta firmware, unzipped
k3fw3r68.rar, deleted the current filed from the beta folder, copied
the new files to the beta folder and assured it was the same folder
the utility was pointing at.
When I tell the utility to send all files to the K3 I get the
following contents in a pop up window.
---
MCU firmware file hmcu0368.hex verified
Sending firmware file hmcu0368.hex to MCU
Send MCU firmware failed at load address x0800
MCU firmware load failed
---
When I first looked at the utility it said I had version MCU 3.67
when I look at the utility now I see nothing Installed in the
Installed in K3 column.
Turning the radio off on I checked the version showing in the K3
it shows uC 03.67.
Trying again to update I get the same message as above.
Any suggestions of what need to do differently?
Thanks
73,
Gary
KA1J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html