Re: [Elecraft] K3 HI SIG on the display
Well I disconnecter all the cables except the power cable and still no go. don't know if the problem is on the DSP board, if it is I sure would like to upgrade with the new DSP board which won't be available for sale for upgrade's could Eric can swing some weight..??? Ed KD7PY -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-HI-SIG-on-the-display-tp7614930p7614938.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 HI SIG on the display
Ed, Remove all coax and other cables except power from the K3, then connect a dummy load. If the HI SIG message is still present, it is likely there is an internal K3 problem. If the message goes away, start connecting things one at a time to determine which is causing the problem. 73, Don W3FPR On 3/5/2016 1:27 PM, KD7PY wrote: Just tried to do the ( PARAMETER INITALIZATION ) per the manul... when powering on a holding shift-lo knob in I get EE INT, norm, hi sig one message, one after another.. still locked up. looks like I might have to send it to the boys at Elecraft. hope I can do the repair myself if not to involved. Ed KD7PY -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-HI-SIG-on-the-display-tp7614930p7614936.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w3...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 HI SIG on the display
Just tried to do the ( PARAMETER INITALIZATION ) per the manul... when powering on a holding shift-lo knob in I get EE INT, norm, hi sig one message, one after another.. still locked up. looks like I might have to send it to the boys at Elecraft. hope I can do the repair myself if not to involved. Ed KD7PY -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-HI-SIG-on-the-display-tp7614930p7614936.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 HI SIG on the display
I just tryed to do a restore configuration with the k3 utility and no go . get a message ( NO RESPONSE TO WRITE EEPROM BLOCK ) -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-HI-SIG-on-the-display-tp7614930p7614933.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 HI SIG on the display
none of the controls seenm to work on the front panel, i can tune the vfo and it changes freq, but i cant get into the menu. http://marc.info/?l=elecraft=144267531705514=2 Dave Hachadorian, K6LL Yuma, AZ . __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 HI SIG on the display
my k3 was working just fine last night when i shut it off. when Ii turned it on this morning i get a HI SIG message where the VFO B display is. disconnected the ant, and all cables to the computer, and it's still there. none of the controls seenm to work on the front panel, i can tune the vfo and it changes freq, but i cant get into the menu. help needed. tnx. Ed KD7PY ex K7WIA -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-HI-SIG-on-the-display-tp7614930.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com