My K3 1322 has an original KAT3 and firmware 5.38 2.86 1.25. Last night I tried to use the LCSET feature of the KAT3 item on the Configuration menu. I have used this successfully in the past, but no luck this time.
I was able to make the L and C values show on the display, but rotating the VFO knobs changed the values on the *previous* display. I could hear VFO A start to test relays as I rotated it to the right, and once I found myself changing the date after rotating VFO B and then A while the unchanged L and C values showed on the display. Exiting from LCSET did not seem to go correctly either. In order to return the KAT3 to Auto, I had to fully exit and re-enter the Configuration menu. Has anyone else had LCSET problems, or am I the only one? For the benefit of the reader, I quote the relevant manual wording, part of the KAT3 item on the Config menu: ******************** Mode LCSET allows manual adjustment of L/C settings (you must exit the menu first). When in LCSET mode, tapping ATU TUNE shows the L and C values; C is changed with VFO A, L is changed with VFO B, and ANT toggles between Ca and Ct. ******************** 73, Paul W8TM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com