[Elecraft] K3 Mini- Loss of bias - side mic jack
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Mini - Loss of bias - side mic jack
It appears I have lost the bias supply going to the side Mic jack on my K3 Mini. There is no bias voltage on the tip of a test cable. However there is 4.7-4.8 volts appearing on pin 6 of the 8 pin front panel mic connector. I note that turning on the Mini from a cold start I see 3.8vdc on the tip of the test cable but it only lasts for a few seconds and very quickly decays to zero. The Menu setting rP.L bIAS is configured and turning the bias off/on by tapping 2 does not effect the volatge 4.7 on pin 6 . It is always on. What do I do.? I am not thrilled about taking the Mini apart as I have ZERO technical information about how to dissaasemble it. Nor do I have a schematic to help ID where the fault may be. I have an outboard bias box that came with my CM500 so I guess I can use that in a pinch. Any comments? 73 Frannk VO1HP -- Sent from Gmail Mobile __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com