Re: [Elecraft] K3 RTTY MMTTY, etc
Are you selecting the correct input for transmit audio (MENU: MIC SEL)? Front panel (8-pin) vs. rear panel (3.5mm MIC jack) vs. LINE IN? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 RTTY MMTTY, etc
On Fri, 18 Jul 2008 13:18:56 -0500, Nick-WA5BDU wrote: >MMTTY seems to use both, with no choice to use just one. MMTTY is pretty primative in this regard. It demands a serial port dedicated ONLY to control of the radio, and a second port for PTT. 73, Jim K9YC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 RTTY MMTTY, etc
Hi Bob- No, I had not tried that. It was at zero. I cranked it up to 25 and still no luck. Did some searches in the nabble archives and saw that it might need to be higher yet. So I went to 50 and now it keys the VOX. I have line in mic gain at about 20. Thanks for the suggestion. 73-Nick, WA5BDU Bob Cunnings wrote: Regarding VOX - have you tried adjusting VOX gain? Bob NW8L ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 RTTY MMTTY, etc
Regarding VOX - have you tried adjusting VOX gain? Bob NW8L On Fri, Jul 18, 2008 at 12:18 PM, Nick-WA5BDU <[EMAIL PROTECTED]> wrote: > Second choice is VOX. I set the K3 for AFSK A, connected line out of the PC > to line in of the K3, turned VOX on, told MMTTY to transmit. No VOX > operation. Plugged phones into the line out jack of the PC and verified -- > yes, good strong RTTY tones being generated. I did try adjusting the MIC > gain, which seems to become a line-in control for this mode. I also did go > to the menu and chose Line In as the MIC input. What's left? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 RTTY MMTTY, etc
I'd like to figure out how to get on RTTY by noon tomorrow. I'm working with N1MM and MMTTY at the moment, with HRD and my trusty paddle as 2nd and 3rd back-ups. Transmit control - It looks like the K3 gives the option of having RTS or DTR actuate the PTT. MMTTY seems to use both, with no choice to use just one. I tried that method, but with serial port connected, the PTT was asserted at all times. Tried both DTR - OFF and RTS - OFF in the setup with same result. (First field is for PTT control and 2nd is for keyed line control.) Second choice is VOX. I set the K3 for AFSK A, connected line out of the PC to line in of the K3, turned VOX on, told MMTTY to transmit. No VOX operation. Plugged phones into the line out jack of the PC and verified -- yes, good strong RTTY tones being generated. I did try adjusting the MIC gain, which seems to become a line-in control for this mode. I also did go to the menu and chose Line In as the MIC input. What's left? I guess my third choice would be to use the serial port, have MMTTY send ACSII data, and the K3 would do the FSK thing. But I'm not sure how I'd get around my PTT control issues. Receive - Seems to be working. No RTTY on at the moment, but when there's a signal, I see it in the waterfall. PC / OS- I'm using a new Vista laptop. I know MMTTY isn't guaranteed to work with Vista, but I think it's working well enough that I should be able at least to operate the VOX. The rig control features of HRD are working fine. TNX / 73- Nick --what a tangled web we weave / when we let computers become part of our ham stations ... ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com