[Elecraft] K3 Serial Comms with Apple Mac ?
One of the very popular serial communications programs available in the Apple Mac store is an application called “Serial”. What makes this app nice to use is that it includes built-in driver interfaces for just about any USB-Serial or serial interface you could put on a Mac computer. I decided to connect to my K3 using Serial. But, I am having trouble getting the K3 to respond. I know I have the right comm port and I know that the K3 can communicate over this comm port. Has anyone used Serial (the app from company Decisive Tactics, Inc.) to communicate with a K3 or any other Elecraft equipment? 73, phil, K7PEH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Serial Comms with Apple Mac ?
I am not sure what you're planning to do with "Serial" but when I'm using my K3/KIO3B withWSJT-X, I have the program configured for CAT Control on /dev/cu.usbserial-A5x at aBaud rate of 38400, 8 data bits, 1 stop bit, Handshake set to 'None', and PTT Method of RTS(set to the same /dev/cu.usbserial device), Mode Data/Pkt, Split 'Rig', and a 1 second Poll Interval.CONFIG:KIO3B is set to 'nor'. Permissions for the port device file are set to 666 and owner/group is root/wheel. You might also want to double-check About My Mac -> System Report -> Hardware -> USBto see if the K3 is showing up - mine is a 'General Purpose USB Hub' with a TI vendor IDwhich has a USB Audio Codec (Burr-Brown) and an FT232R USB UART whose serial numbermatches the device special file that WSJT-X is talking to. Also, go to System Preferences -> Network and make sure that that port is not configured.(It most likely is not, but Murphy does very strange things at times!) It wouldn't surprise me if Serial might have a permission problem/setting that's fouling you up,but that's just a SWAG on my part. I'm running Lady Heather through another USB line to myGPSDO without any fiddling on the macOS side, but you never know. HTH and 73, Brandy, N1HOMid-2017 5k 27" iMac, early-2015 13" Retina MBPro On Sunday, May 6, 2018, 2:48:28 PM EDT, Phil Hystad wrote: One of the very popular serial communications programs available in the Apple Mac store is an application called “Serial”. What makes this app nice to use is that it includes built-in driver interfaces for just about any USB-Serial or serial interface you could put on a Mac computer. I decided to connect to my K3 using Serial. But, I am having trouble getting the K3 to respond. I know I have the right comm port and I know that the K3 can communicate over this comm port. Has anyone used Serial (the app from company Decisive Tactics, Inc.) to communicate with a K3 or any other Elecraft equipment? 73, phil, K7PEH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Serial Comms with Apple Mac ?
Brandy, Actually, I wasn’t planning to do anything with the Serial app and comms to the K3. My questions stem from the fact that I have used Serial with a number of other devices (mostly Arduino, Raspberry Pi, and PIC boards) so I thought: try it out with the K3. My failure to get a response is what prompted my question. Not sure I will find anything amiss from your suggestions (already having done one or two of those types of checks) but I will try again. Now, it is a mere curiosity thing — this should work. I have successfully communicated with Elecraft serial equipment using my own serial-comms programs I have written (C and Python). Ordinarily of course, I use only the Elecraft utilities to do anything useful. 73, phil, K7PEH > On May 6, 2018, at 12:44 PM, Bayard Coolidge, N1HO wrote: > > I am not sure what you're planning to do with "Serial" but when I'm using my > K3/KIO3B with > WSJT-X, I have the program configured for CAT Control on > /dev/cu.usbserial-A5x at a > Baud rate of 38400, 8 data bits, 1 stop bit, Handshake set to 'None', and PTT > Method of RTS > (set to the same /dev/cu.usbserial device), Mode Data/Pkt, Split 'Rig', and a > 1 second Poll Interval. > CONFIG:KIO3B is set to 'nor'. > > Permissions for the port device file are set to 666 and owner/group is > root/wheel. > > You might also want to double-check About My Mac -> System Report -> Hardware > -> USB > to see if the K3 is showing up - mine is a 'General Purpose USB Hub' with a > TI vendor ID > which has a USB Audio Codec (Burr-Brown) and an FT232R USB UART whose serial > number > matches the device special file that WSJT-X is talking to. > > Also, go to System Preferences -> Network and make sure that that port is not > configured. > (It most likely is not, but Murphy does very strange things at times!) > > It wouldn't surprise me if Serial might have a permission problem/setting > that's fouling you up, > but that's just a SWAG on my part. I'm running Lady Heather through another > USB line to my > GPSDO without any fiddling on the macOS side, but you never know. > > HTH and 73, > > Brandy, N1HO > Mid-2017 5k 27" iMac, early-2015 13" Retina MBPro > > On Sunday, May 6, 2018, 2:48:28 PM EDT, Phil Hystad wrote: > > > One of the very popular serial communications programs available in the Apple > Mac store is an application called “Serial”. What makes this app nice to use > is that it includes built-in driver interfaces for just about any USB-Serial > or serial interface you could put on a Mac computer. > > I decided to connect to my K3 using Serial. But, I am having trouble getting > the K3 to respond. I know I have the right comm port and I know that the K3 > can communicate over this comm port. > > Has anyone used Serial (the app from company Decisive Tactics, Inc.) to > communicate with a K3 or any other Elecraft equipment? > > 73, phil, K7PEH > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Serial Comms with Apple Mac ?
FTDI driver for MacOS works fine with K3 Utility and KX3 Utility on MacOS. http://www.ftdichip.com/Drivers/VCP.htm 73 de JH3SIF, Keith > 2018/05/07 5:27、Phil Hystad のメール: > > Brandy, > > Actually, I wasn’t planning to do anything with the Serial app and comms to > the K3. My questions stem from the fact that I have used Serial with a > number of other devices (mostly Arduino, Raspberry Pi, and PIC boards) so I > thought: try it out with the K3. My failure to get a response is what > prompted my question. > > Not sure I will find anything amiss from your suggestions (already having > done one or two of those types of checks) but I will try again. Now, it is a > mere curiosity thing — this should work. I have successfully communicated > with Elecraft serial equipment using my own serial-comms programs I have > written (C and Python). Ordinarily of course, I use only the Elecraft > utilities to do anything useful. > > 73, phil, K7PEH > > >> On May 6, 2018, at 12:44 PM, Bayard Coolidge, N1HO wrote: >> >> I am not sure what you're planning to do with "Serial" but when I'm using my >> K3/KIO3B with >> WSJT-X, I have the program configured for CAT Control on >> /dev/cu.usbserial-A5x at a >> Baud rate of 38400, 8 data bits, 1 stop bit, Handshake set to 'None', and >> PTT Method of RTS >> (set to the same /dev/cu.usbserial device), Mode Data/Pkt, Split 'Rig', and >> a 1 second Poll Interval. >> CONFIG:KIO3B is set to 'nor'. >> >> Permissions for the port device file are set to 666 and owner/group is >> root/wheel. >> >> You might also want to double-check About My Mac -> System Report -> >> Hardware -> USB >> to see if the K3 is showing up - mine is a 'General Purpose USB Hub' with a >> TI vendor ID >> which has a USB Audio Codec (Burr-Brown) and an FT232R USB UART whose serial >> number >> matches the device special file that WSJT-X is talking to. >> >> Also, go to System Preferences -> Network and make sure that that port is >> not configured. >> (It most likely is not, but Murphy does very strange things at times!) >> >> It wouldn't surprise me if Serial might have a permission problem/setting >> that's fouling you up, >> but that's just a SWAG on my part. I'm running Lady Heather through another >> USB line to my >> GPSDO without any fiddling on the macOS side, but you never know. >> >> HTH and 73, >> >> Brandy, N1HO >> Mid-2017 5k 27" iMac, early-2015 13" Retina MBPro >> >> On Sunday, May 6, 2018, 2:48:28 PM EDT, Phil Hystad wrote: >> >> >> One of the very popular serial communications programs available in the >> Apple Mac store is an application called “Serial”. What makes this app nice >> to use is that it includes built-in driver interfaces for just about any >> USB-Serial or serial interface you could put on a Mac computer. >> >> I decided to connect to my K3 using Serial. But, I am having trouble >> getting the K3 to respond. I know I have the right comm port and I know >> that the K3 can communicate over this comm port. >> >> Has anyone used Serial (the app from company Decisive Tactics, Inc.) to >> communicate with a K3 or any other Elecraft equipment? >> >> 73, phil, K7PEH >> > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jh3...@sumaq.jp __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
