Re: [Elecraft] K3 data mode fail
Skip, Make certain the K3 is getting audio into the Line In jack. Pull the speaker or Line Out cable from your soundcard and plug headphones or amplified computer speakers into that soundcard jack. Then do a TX from your software application. Do you hear any audio tones? If not, check the computer/soundcard. If audio there, plug in the cable to the K3 Line In making sure the plugs are fully seated on each end. You could have a bad cable. Since you have good audio to the computer on RX, swap the two audio cables between the soundcard and the K3. If you have an OK waterfall display, the cable between K3 Line Out and soundcard line in (mic) is working. If you still have problems, contact supp...@elecraft.com for further analysis. 73, Don W3FPR On 6/30/2019 11:43 PM, Skip Cameron wrote: While using my K3 in data A mode with wsjt-x software on 6M, TX stopped, and other data modes also have no TX output. RX remains OK, and CW and SSB TX & RX still work OK. Need suggestions on diagnosis or reset process. Direct replies off list are OK. Thanks, Skip W5GAI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 data mode fail
Skip, Check your soundcard cable to your Line-in jack. I had the same problem occur several times before I discovered the problem was the cable. I pressed on it at the line in jack while testing and the power out came back up. Same symptoms: no output, RX signals OK, CW and SSB OK. Replaced the cable and everything FB now. 73 de Ed Sad News For Meghan Markle And Prince Harry track.volutrk.com http://thirdpartyoffers.juno.com/TGL3141/5d19eb71cd8946b712651st03vuc __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 data mode fail
On 6/30/2019 8:43 PM, Skip Cameron wrote: Need suggestions on diagnosis or reset process. VOX settings? Level changes? Windoze updates screwing with sound card settings or choices? 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 data mode fail
While using my K3 in data A mode with wsjt-x software on 6M, TX stopped, and other data modes also have no TX output. RX remains OK, and CW and SSB TX & RX still work OK. Need suggestions on diagnosis or reset process. Direct replies off list are OK. Thanks, Skip W5GAI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
