Re: [Elecraft] K3EXREF install in K3 build?
Matt Zilmer wrote > I would go without it until you get the basic radio together, just the > same. "Should not" isn't that same as "won't". Good advice. Since I will be installing the KRX3 and KPA3 after basic testing and calibration anyway, I'll be prudent and install the K3EXREF then. Thanks for the comments. - 73, Stan - KR7C -- View this message in context: http://elecraft.365791.n2.nabble.com/K3EXREF-install-in-K3-build-tp7564062p7564070.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3EXREF install in K3 build?
If the K3EXREF is left unconnected to an external frequency reference, it should not affect any calibrations. If it is connected to a ref oscillator, it would affect your reference freq calibration - in that you wouldn't really need to do it at all. I would go without it until you get the basic radio together, just the same. "Should not" isn't that same as "won't". I was one of the Field Testers for the ref board, and I went through the process both ways: as a "new build", and again as an add-on. Neither of them was affected by the presence of the ref board. Others may have differing opinions. 73, matt W6NIA On Sat, 13 Oct 2012 10:56:05 -0700 (PDT), you wrote: >I'm building my second K3 with the K3EXREF option and I wonder if anyone can >tell me if it would be a problem to install the K3EXREF during initial >construction, at the same time as the KREF3. Would it affect initial >testing and/or calibration? > >Thanks, > > > >- >73, Stan - KR7C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3EXREF install in K3 build?
I'm building my second K3 with the K3EXREF option and I wonder if anyone can tell me if it would be a problem to install the K3EXREF during initial construction, at the same time as the KREF3. Would it affect initial testing and/or calibration? Thanks, - 73, Stan - KR7C -- View this message in context: http://elecraft.365791.n2.nabble.com/K3EXREF-install-in-K3-build-tp7564062.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html