As it turns out the issues are mostly related to my antenna and operator
error... e.g. not knowing how to correctly use the DSP/AGC/Filters/RF
gain.etc..
Rig is working 100% PEBKAC error ;)
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of dw
Sent: Monday, October 12, 2015 2:03 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S Radio check? (signal generator)
I used a simple 4-pin clock-oscillator running at 7.32mhz.
Runs on 5VDC.
Put it in a project box with LM7805 and a 12 inch wire as antenna.
Can't use that as a signal generator for circuit tracing though without
seriously limiting its output.
But it makes for a simple little qrp xmitter.
With nothing attached to K3 ANT1 input, lay the wire next to the K3.
Picked up the signal S9.
Hope you find the issue Jerry.
--
bw...@fastmail.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to je...@carolinaheli.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
