Re: [Elecraft] KBPF3 and KPA500
Received 3 HD15 M/F gender changers, pulled pin 11 out, attached it the end of the KPA500 control cable, and now the KBPF3 and KPA500 work perfect! Should now be able to use a receive only antenna on 80. My vertical is OK, but it can be noisy. 73 DE K8CXM ... Jim From: Jim Leder (Hotmail) Sent: Friday, September 13, 2013 6:06 PM To: Elecraft Subject: KBPF3 and KPA500 I installed a KBPF3 option, and it works OK, mostly. I also have a PR6, so I am trying to use the BYPASS connector of the PR6. I have pulled the jumper in the PR6, so the BYPASS would would work. And it does, as long as my KPA500 cable is disconnected. When I connect the KPA500 control cable, it seems power is ALWAYS applied to the PR6, rendering the BYPASS not connected. DIGIOUT1 is off on all bands, except 6. When I disconnect the KPA500 control cable, all works as it should (except the KPA500). What am I missing? Jim Bob Buckeye AKA Jim Leder K8CXM since 1961 IBM retiree since 1999 There are 10 types of people in this world -- those who understand binary and those who don't. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KBPF3 and KPA500
As I understand it, the way the PR6 uses the DIGOUT1 connection (pin 11) and the way the KPA500 uses the same connection are physically incompatible with one another. The solution is apparently to break the connection on pin 11 to the KPA500 - see http://elecraft.365791.n2.nabble.com/KPA500-PR6-AUX-Cable-Pin-11-td7558085.html . I believe that if you wanted to use the KPA500's INHIB IN feature, you would have to connect the K3's pin 11 to the KPA500, install jumper P2 in the PR6 and disconnect the control connection from the PR6 to pin 11, thus disabling its automatic bypass feature. 73, Rich VE3KI K8CXM wrote: I installed a KBPF3 option, and it works OK, mostly. I also have a PR6, so I am trying to use the BYPASS connector of the PR6. I have pulled the jumper in the PR6, so the BYPASS would would work. And it does, as long as my KPA500 cable is disconnected. When I connect the KPA500 control cable, it seems power is ALWAYS applied to the PR6, rendering the BYPASS not connected. DIGIOUT1 is off on all bands, except 6. When I disconnect the KPA500 control cable, all works as it should (except the KPA500). What am I missing? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KBPF3 and KPA500
Hi Jim, This has been mentioned a couple of times with some good trouble shooting by somebody last month (I didn't save the email and couldn't track it down in the searchable archives). What he found was there is a connection in the KAT500 that was pulling the DIGOUT1 signal low and keeping the PR6 turned on all the time. A couple of fix suggestions were made including removing R63 in the KAT500 or clipping pin-11 in the TX Keying line interrupter (if you are using it). You could also get another DE15HD gender changer and clip pin-11 in it and still maintain the amp keying line in the KPAK3AUX cable. Or you can just activate the PR6 when you want to by supplying it 12V power. You may want to contact Elecraft Customer Service about the advisability of removing R63 or other solutions they may have found. Cheers, Fred KE7X Fred Cady The Elecraft K3: Design, Configuration and Operation 2nd ed The Elecraft KX3 - Going for the summit www.ke7x.com or www.lulu.com (Working on The Elecraft K-Line: KPA500 and KAT500) fcady at ieee dot org -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft- boun...@mailman.qth.net] On Behalf Of Jim Leder (Hotmail) Sent: Friday, September 13, 2013 4:06 PM To: Elecraft Subject: [Elecraft] KBPF3 and KPA500 I installed a KBPF3 option, and it works OK, mostly. I also have a PR6, so I am trying to use the BYPASS connector of the PR6. I have pulled the jumper in the PR6, so the BYPASS would would work. And it does, as long as my KPA500 cable is disconnected. When I connect the KPA500 control cable, it seems power is ALWAYS applied to the PR6, rendering the BYPASS not connected. DIGIOUT1 is off on all bands, except 6. When I disconnect the KPA500 control cable, all works as it should (except the KPA500). What am I missing? Jim Bob Buckeye AKA Jim Leder K8CXM since 1961 IBM retiree since 1999 There are 10 types of people in this world -- those who understand binary and those who don't. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KBPF3 and KPA500
I installed a KBPF3 option, and it works OK, mostly. I also have a PR6, so I am trying to use the BYPASS connector of the PR6. I have pulled the jumper in the PR6, so the BYPASS would would work. And it does, as long as my KPA500 cable is disconnected. When I connect the KPA500 control cable, it seems power is ALWAYS applied to the PR6, rendering the BYPASS not connected. DIGIOUT1 is off on all bands, except 6. When I disconnect the KPA500 control cable, all works as it should (except the KPA500). What am I missing? Jim Bob Buckeye AKA Jim Leder K8CXM since 1961 IBM retiree since 1999 There are 10 types of people in this world -- those who understand binary and those who don't. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html