Earl,
You may want to touch up the soldering on T1-5 and T1-4 first. Either T1
has a broken primary wire or a bad solder connection. The 300 ohms
resistance reading is proper with an open primary - R22 is in parallel with
the T1 primary winding.
73,
Don W3FPR
- Original Message -
My KPA100 has no RF out. Low power from the K2 is great. In checking I find
RF as far as T1-5 then it stops. The primary winding shows 300 ohms to
ground from T1-5. Does this teflon wire have that much resistance??
I guess I just dont understand why the power is not being transferred and
would appreciate some help from others.
Thank you, EArl VE3FBK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
