Re: [Elecraft] KPA100 no PA Key Out
Sorry for the bandwidth, we found it ourselves. The 8r Hold parameter was set to 0.01 . -- Ohne CW ist es nur CB.. 73, Martin DM4iM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA100 no PA Key Out
Martin, It could be a solder failure, a failure of Q12, an open R1, or a bad output from firmware U1 pin 16. 73, Don W3FPR On 9/15/2018 9:28 AM, Martin wrote: Elecrafters, a friend is trying to connect his K2/100 to his external amp. I own a K2/10 only , so have no expirience with it. He performed measurements and found the PA Key Out on the rear panel of the KPA100 will not go low on transmit. What could be the cause? Thanks. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA100 no PA Key Out
Elecrafters, a friend is trying to connect his K2/100 to his external amp. I own a K2/10 only , so have no expirience with it. He performed measurements and found the PA Key Out on the rear panel of the KPA100 will not go low on transmit. What could be the cause? Thanks. -- Ohne CW ist es nur CB.. 73, Martin DM4iM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
