Re: [Elecraft] KSB2 Install Question
Carl, Yes, that statement goes back a long way - when the base K2 crystal cases were grounded by wires soldered at the top - if the grounded wires were placed on the left side of the crystals, they could physically interfere with the KSB2 board. But we are now grounding the crystals low on both sides of the crystal case, so if your 'low' is low enough to be below the level of the installed KSB2 board, there is no problem. I believe that statement has disappeared (or at least has conditioning words) in the latest version of the KSB2 instructions. 73, Don W3FPR Life is what happens when you are making other plans - Original Message - This weekend I put together the SSB Board -- although I have a few hours of work left on the main K2 kit. I wanted to make sure that I had SSB ready to go when the K2 is finished. When I finished the SSB board and looked at the installation instructions, it had a rather weird sentence or two saying that if the filter crystals X7-X11 were ground on the left side that this would interfere with the SSB module installation. Well, when I construct the RF board the instructions clearly said to ground the aforementioned crystals on both left and right side. Furthermore, I did a test mounting of the SSB board and discovered that the left side grounds for the crystal covers do not seem to make any kind of physical contact with the SSB board. My question is is this perhaps a case of my KSB2 instructions being written (2 May 00) before those from my main kit (22 Oct 02). Perhaps, a modification was made in the RF board which makes these KSB2 instructions null and void. It's either that, or poor instructions in the general kit manual. And, we all know Elecraft wouldn't do that! :-) Any clarification here would be appreciated! Oh yes, for the record, I have SN 03116 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must subscribe to post. Subscriber Info (Addr. Change, Unsub etc): http://mailman.qth.net/subscribers.htm Elecraft page: http://www.elecraft.com
Re: [Elecraft] KSB2 Install Question
You can download the latest version of KSB2 construction manual from the official website of elecraft. The grounding of X7 to X11 should be on both sides (narrow sides) of the Xtal. 73 Johnny Siu VR2XMC s/n 1146, 3837, 4165, 4255 - Original Message - From: "Carl J. Denbow" <[EMAIL PROTECTED]> To: "Elecraft Reflector" Sent: Monday, May 10, 2004 8:52 AM Subject: [Elecraft] KSB2 Install Question This weekend I put together the SSB Board -- although I have a few hours of work left on the main K2 kit. I wanted to make sure that I had SSB ready to go when the K2 is finished. When I finished the SSB board and looked at the installation instructions, it had a rather weird sentence or two saying that if the filter crystals X7-X11 were ground on the left side that this would interfere with the SSB module installation. Well, when I construct the RF board the instructions clearly said to ground the aforementioned crystals on both left and right side. Furthermore, I did a test mounting of the SSB board and discovered that the left side grounds for the crystal covers do not seem to make any kind of physical contact with the SSB board. My question is is this perhaps a case of my KSB2 instructions being written (2 May 00) before those from my main kit (22 Oct 02). Perhaps, a modification was made in the RF board which makes these KSB2 instructions null and void. It's either that, or poor instructions in the general kit manual. And, we all know Elecraft wouldn't do that! :-) Any clarification here would be appreciated! Oh yes, for the record, I have SN 03116 73 Carl N8VZ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must subscribe to post. Subscriber Info (Addr. Change, Unsub etc): http://mailman.qth.net/subscribers.htm Elecraft page: http://www.elecraft.com
[Elecraft] KSB2 Install Question
This weekend I put together the SSB Board -- although I have a few hours of work left on the main K2 kit. I wanted to make sure that I had SSB ready to go when the K2 is finished. When I finished the SSB board and looked at the installation instructions, it had a rather weird sentence or two saying that if the filter crystals X7-X11 were ground on the left side that this would interfere with the SSB module installation. Well, when I construct the RF board the instructions clearly said to ground the aforementioned crystals on both left and right side. Furthermore, I did a test mounting of the SSB board and discovered that the left side grounds for the crystal covers do not seem to make any kind of physical contact with the SSB board. My question is is this perhaps a case of my KSB2 instructions being written (2 May 00) before those from my main kit (22 Oct 02). Perhaps, a modification was made in the RF board which makes these KSB2 instructions null and void. It's either that, or poor instructions in the general kit manual. And, we all know Elecraft wouldn't do that! :-) Any clarification here would be appreciated! Oh yes, for the record, I have SN 03116 73 Carl N8VZ -- Carl J. Denbow, [EMAIL PROTECTED] on 5/9/2004 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must subscribe to post. Subscriber Info (Addr. Change, Unsub etc): http://mailman.qth.net/subscribers.htm Elecraft page: http://www.elecraft.com
