[Elecraft] KX3 - The rectangular hole on the back of KX3
Hi everybody, I have KX3-F with Serial #029. I have also the same question; what is the empty rectangular hole on the back of my KX3 which I can see the inside of the KX3 clearly? Is my KX3 missing the rear heat sink? Do I need to do something for that? 73, Ruchan Ozatay, TA2AH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 - The rectangular hole on the back of KX3
Yes, send to pa...@elecraft.com and request he KX3 heat sink. 73, Don W3FPR On 7/5/2012 3:23 AM, Ruchan Ozatay, TA2AH wrote: Hi everybody, I have KX3-F with Serial #029. I have also the same question; what is the empty rectangular hole on the back of my KX3 which I can see the inside of the KX3 clearly? Is my KX3 missing the rear heat sink? Do I need to do something for that? 73, Ruchan Ozatay, TA2AH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 - The rectangular hole on the back of KX3
It would appear that the heat sink was added after the first several production units went out. I would wonder whether the early models have the holes in the bottom cover to accept the heat sink? If not, a bottom cover would be needed also. To be sure, I would ask this question when corresponding with Elecraft. I would also ask if longer screws are needed for the PA transistors. GL, Bruce, N1RX Yes, send to parts at elecraft.com http://mailman.qth.net/mailman/listinfo/elecraft and request he KX3 heat sink. 73, Don W3FPR On 7/5/2012 3:23 AM, Ruchan Ozatay, TA2AH wrote: Hi everybody, I have KX3-F with Serial #029. I have also the same question; what is the empty rectangular hole on the back of my KX3 which I can see the inside of the KX3 clearly? Is my KX3 missing the rear heat sink? Do I need to do something for that? 73, Ruchan Ozatay, TA2AH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 - The rectangular hole on the back of KX3
No change to the bottom cover, Bruce. The heat sink mounts using the four holes that are already present: one at each end and two for the transistors. 73, Ron AC7AC -Original Message- It would appear that the heat sink was added after the first several production units went out. I would wonder whether the early models have the holes in the bottom cover to accept the heat sink? If not, a bottom cover would be needed also. To be sure, I would ask this question when corresponding with Elecraft. I would also ask if longer screws are needed for the PA transistors. GL, Bruce, N1RX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html