[Elecraft] KX3 – is a TX DLY function available?

2015-08-04 Thread Graham g3tct
I have no problem driving a linear with a slow relay from my K3, but my 
KX3 causes the linear to trip out when I try to use the cw in ssb mode 
(cw in cw mode behaves ok). In the K3 manual it refers to the delay in 
producing RF – TX DLY which has a default of 8ms. But I can't see an 
equivalent function in the KX3 – might this be the problem, and what 
default value does it use?


Graham

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] KX3 - is a TX DLY function available?

2015-08-04 Thread Cady, Fred
Hi Graham,
Check the KX3 TX DLY menu.  The default is 5 milliseconds and you can increase 
it to 20 milliseconds.

Cheers,
Fred KE7X
Author of:
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
"The Elecraft KPA500 and KAT500 - the K-Line Dream Station"
Printed, coil bound copies of these are all available at www.elecraft.com
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide

KAT500 and KXPA500 Tuner Operation
http://www.ke7x.com/home/kat500-and-kxpa100-tuners

"The Elecraft KXPA100, PX3 and 2M/4M Transverters - Assembling the KX3-Line 
Station" available at www.lulu.com.

"The Elecraft K3S and P3"  and a 3rd Edition of the K3 book with K3S upgrade 
parts are works in progress.

> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> Graham g3tct
> Sent: Tuesday, August 04, 2015 11:26 AM
> To: Elecraft reflector
> Subject: [Elecraft] KX3 - is a TX DLY function available?
> 
> I have no problem driving a linear with a slow relay from my K3, but my
> KX3 causes the linear to trip out when I try to use the cw in ssb mode
> (cw in cw mode behaves ok). In the K3 manual it refers to the delay in
> producing RF - TX DLY which has a default of 8ms. But I can't see an
> equivalent function in the KX3 - might this be the problem, and what
> default value does it use?
> 
> Graham
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to fc...@ece.montana.edu
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com