Re: [Elecraft] KX3 CAT control fails via KXPA100
Dick, Wayne, Many thanks. Thanks to Dick's explanation below, the Problem is solved. Amateur Contact Log now reads and controls the KX3 regardless of PA Mode on/off. The solution was to manually set the KX3 baud rate to 38.4 and set AC log to that as well. Previously, AC Log and the KX3 were communicating at 4800 Baud. Thanks for the quick replies, especially early on a Saturday morning! 73, Jim -Original Message- From: Dick Dievendorff [mailto:d...@elecraft.com] Sent: Saturday, December 28, 2013 11:45 AM To: Jim Kutsch, KY2D Subject: Re: [Elecraft] KX3 CAT control fails via KXPA100 Jim: what RS232 speed are you using? Can you set your logger and KX3 to 38400 bit/s and try it with KX3 PA mode in both settings? The KX3 switches to 38400 when PA mode is on, no matter what the menu says. Dick, K6KR > On Dec 28, 2013, at 3:57, "Jim Kutsch, KY2D" wrote: > > My KXPA100 arrived yesterday. It's a great amp and very easy to setup > and use. I have one unexpected issue though. > > > > Set up is PC connected via KUSB to the KXPA100, KXPA100 connected by > KXPACBL to the KX3, and latest firmware on both. When PA Mode is set > to on, Amateur Contact log cannot read or set anything (e.g., > frequency or mode) on the KX3. When PA Mode is set to off, all works as expected. > > > > Is this a known issue or might I have something configured incorrectly? > > > > Thanks and 73, Jim > > > > > > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 CAT control fails via KXPA100
Hi Jim, We'll look into this right away. 73, Wayne N6KR On Dec 28, 2013, at 3:57 AM, "Jim Kutsch, KY2D" wrote: > My KXPA100 arrived yesterday. It's a great amp and very easy to setup and > use. I have one unexpected issue though. > > > > Set up is PC connected via KUSB to the KXPA100, KXPA100 connected by KXPACBL > to the KX3, and latest firmware on both. When PA Mode is set to on, Amateur > Contact log cannot read or set anything (e.g., frequency or mode) on the > KX3. When PA Mode is set to off, all works as expected. > > > > Is this a known issue or might I have something configured incorrectly? > > > > Thanks and 73, Jim > > > > > > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KX3 CAT control fails via KXPA100
My KXPA100 arrived yesterday. It's a great amp and very easy to setup and use. I have one unexpected issue though. Set up is PC connected via KUSB to the KXPA100, KXPA100 connected by KXPACBL to the KX3, and latest firmware on both. When PA Mode is set to on, Amateur Contact log cannot read or set anything (e.g., frequency or mode) on the KX3. When PA Mode is set to off, all works as expected. Is this a known issue or might I have something configured incorrectly? Thanks and 73, Jim __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html