Re: [Elecraft] KX3 Macro programming question?
WA7SPY wrote MN,120; MP128; (KX3 goes to CW Key 1 tip dot) MN120; MP127; (KX3 goes to CW Key 1 HAND The macros should be: MN120;MP000; (CW Key 1 tip=dot) bit 1 is CLEARED and MN120;MP002; (CW Key 1 HAND) bit 1 is SET You should only provide the bit value for the parameter selected by the MN; command. The best way to see the correct command is to use the utility to read the value for whatever parameter you are interested in (in this case MN120) after you set it to the value you want manually on the KX3. - 73, Stan - KR7C -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Macro-programming-question-tp7588615p7588685.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 Macro programming question?
elecraft@mailman.qth.net Content-Transfer-Encoding: quoted-printable Mime-Version: 1.0 (1.0) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=comcast.net; s=q20140121; t=1399321520; bh=NSkE2StQBxDqQDaJyMxIKq/IyiIBGDY4FwuGtDDncn4=; h=Received:Received:Subject:From:Content-Type:Message-Id:Date:To: Mime-Version; b=UJh9TkChiuXBbGss+yTSBD0bCK1OmOp3dkwukrEIhjgS6nsjAJ/EGNTZxHQumr0d/ aB2LlKuFKnX2jz2UyQkXQpU0+a8D0WJ1OH5uwc69HbtD84QIBGOkYCPUZHM+45xZsC dnwkZ96KE3jZSAP7c2BnBqX4bCfpNlkD/FiwsFokFD3Y+0n5HhOOCLYcGhAJOaNJzX R2LUzhZkXlEyQd2922pRxZtjIyiaGVw0lEU9HK5j679U50pnUHryvmMRvzXwxcMh7T cbEIT6kqUJ8fXQaosE04y8CoaZu2E9F/IsbPel12Y3/4K0U72Bs2mmvFlvq7Bq/2Y6 YxP+PubpayFCg== I would like to use my PF1 and PF2 buttons on my KX3 to do the following: PF1 change CW Key 1 from tip dot to HAND PF2 change CW Key 1 from HAND back to tip dot. I have tried the KX3 utility with the test commands. I can give the command:= MN,120; MP128; (KX3 goes to CW Key 1 tip dot) MN120; MP127; (KX3 goes to CW Key 1 HAND When I write these commands to Macro 1 and 2 respectively both PF1 and PF2 p= ut the KX3 to CW Key 1 HAND. How do I set this up so I can toggle between CW= Key1 tip dot and CW Key 1 HAND using PF1 and PF2?=20 I like to switch between my bug and single lever paddle and using PF1 and PF2= would be nice to use to toggle the tip from dot to HAND and back. Thanks in advance, Glenn WA7SPY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 Macro programming question?
Hi Glenn, I did something else for that purpose; I created a small pigs tail with a two pin female connector and a 6.3 mm female stereo connector at the other end for my straight key and plug the paddle in the key connector at the left side. In the setup I set the side connector to normal iambic and the front connector to HAND so I can use both without any switching at all. The rightmost 2 vertically oriented pins in the hole that is used to connect the portable paddle, are to be used in that case. The small connector was salvaged from some junk-box-PCB and sealed with shrink-tube. If you like I can send you a picture of what I made. 73, Peter Op 2014-05-05 22:25 schreef WA7SPY: elecraft@mailman.qth.net I would like to use my PF1 and PF2 buttons on my KX3 to do the following: PF1 change CW Key 1 from tip dot to HAND PF2 change CW Key 1 from HAND back to tip dot. I have tried the KX3 utility with the test commands. I can give the command:= MN,120; MP128; (KX3 goes to CW Key 1 tip dot) MN120; MP127; (KX3 goes to CW Key 1 HAND When I write these commands to Macro 1 and 2 respectively both PF1 and PF2 p= ut the KX3 to CW Key 1 HAND. How do I set this up so I can toggle between CW= Key1 tip dot and CW Key 1 HAND using PF1 and PF2?=20 I like to switch between my bug and single lever paddle and using PF1 and PF2= would be nice to use to toggle the tip from dot to HAND and back. Thanks in advance, Glenn WA7SPY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to pa0...@xs4all.nl __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com