Hi Igor,
The 150 mA target is with the backlight off. It's a transflective
display, so it's highly visible even with no backlight, except at
night. But we'll have a low setting of the backlight that adds very
little current drain -- maybe 10 mA.
The LCD itself, and its controller, draw almost no power, so turning
the display completely off wouldn't buy anything.
However, we'll be looking at various ways to cut current drain and
will explain them in the owner's manual, as we did for the K2.
73,
Wayne
N6KR
On May 30, 2011, at 2:39 PM, Igor Kosvin wrote:
Wayne,
Is the 150mA RX current of KX3 is with the LCD display on and some
level
backlight active? What if there could be option to the display go to
sleep
if no knobs are touched for some time? Kind of like screen saving
mode.
Could that be considered? I bet the display takes considerable
current draw
out of KX3 budget. I wander if you have figured the budget, I.e. how
much
each stage draws.
Thanks,
Igor, N1YX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html