I posted a question a few days earlier about the KX3 and this particular problem...thanks to those of you who responded. I was asked to post the solution, so:
The issue was sending CW using VOX or MOX, the key-up signal was strong locally. I measured this with a spectrum analyzer at about 60 db down from key-down carrier. It was in spec, but locals complained a bit. Elecraft suggested I adjust TxCRNULL, and this worked, improving the suppression to about 80db down. This is the same adjustment used for carrier suppression in SSB modes. Initially the procedure in the manual did not work, and it turns out the adjustment must be made in CW mode only. It will not work in CW-REV or transverter bands, only in CW on 160-6m bands. The adjustment is independent for each band. Use the VFO knob to adjust the number, and toggle between PRE and ATTEN, there are two numbers to adjust. 73, Jim ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html