Re: [Elecraft] NAP3 setup with KX3
Found the problem thanks to your suggestions. After a bit of digging discovered that the X-Fi Go Pro has no stereo mixer. Switched to the slightly more expensive and much bulkier X-Fi Surround and now works well. Thanks all. Reed AA1RB On Sun, Dec 29, 2013 at 10:43 PM, Don Wilhelm w3...@embarqmail.com wrote: Check to be certain both channels are being sent to the soundcard. The levels should be the same in both channels. It could be a cable problem or a soundcard problem that is only presenting one channel to the NaP3 application. Unplug each channel (one at a time) and see if the display indicates about the same level from each channel (yes, you will have mirrored images with only one channel). Do you have the KX3 set to output RX IQ signals? If all that is OK, then tune to a strong signal (S-9 plus) and the NaP3 WBIR algorithm should eliminate the mirrored responses. 73, Don W3FPR On 12/29/2013 7:54 PM, Reed Bumgarner wrote: I'm having problems setting up NAP3 with the KX3 and a Creative XI-FI soundcard plugged into my ASUS W 8.1 laptop. I followed the configure instructions as closely as I could but the display is not right. It's just a symmetrical waterfall and spectrum around the center of the screen. I.E. One side is a mirror image of the other. Otherwise it recognizes the rig and soundcard fine. Any ideas? Reed AA1RB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] NAP3 setup with KX3
I'm having problems setting up NAP3 with the KX3 and a Creative XI-FI soundcard plugged into my ASUS W 8.1 laptop. I followed the configure instructions as closely as I could but the display is not right. It's just a symmetrical waterfall and spectrum around the center of the screen. I.E. One side is a mirror image of the other. Otherwise it recognizes the rig and soundcard fine. Any ideas? Reed AA1RB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] NAP3 setup with KX3
Do You have I/Q turned on in KX3 Menu? -- View this message in context: http://elecraft.365791.n2.nabble.com/NAP3-setup-with-KX3-tp7582238p7582242.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] NAP3 setup with KX3
Check to be certain both channels are being sent to the soundcard. The levels should be the same in both channels. It could be a cable problem or a soundcard problem that is only presenting one channel to the NaP3 application. Unplug each channel (one at a time) and see if the display indicates about the same level from each channel (yes, you will have mirrored images with only one channel). Do you have the KX3 set to output RX IQ signals? If all that is OK, then tune to a strong signal (S-9 plus) and the NaP3 WBIR algorithm should eliminate the mirrored responses. 73, Don W3FPR On 12/29/2013 7:54 PM, Reed Bumgarner wrote: I'm having problems setting up NAP3 with the KX3 and a Creative XI-FI soundcard plugged into my ASUS W 8.1 laptop. I followed the configure instructions as closely as I could but the display is not right. It's just a symmetrical waterfall and spectrum around the center of the screen. I.E. One side is a mirror image of the other. Otherwise it recognizes the rig and soundcard fine. Any ideas? Reed AA1RB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
