[Elecraft] Navigator and K3
OK, I have my K3/P3 and Navigator correctly hooked up, I think. I am able to receive digital signals like PSK31, no problem. I cannot seem to get any RF output using the Navigator to my P3. I probably have some parameter set up wrong. Any ideas? Tnx de Brian W3BW *Brian F. Wruble, C.F.A. *70 is the new 40.* * Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077 Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930 eFax 305.768.0278 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Navigator and K3
Brian, Are you using the K3 Line In and Line Out connectors? If so, the Navigator must be configured for line level output. You can check the audio input in TX Test mode - bring up the audio drive (and the Line In gain) enough to illuminate 4 bars on the ALC meter (that is NO ALC for the K3). The 5th bar might flicker a bit and that indicated the proper level. 73, Don W3FPR On 6/1/2013 5:06 PM, Brian F. Wruble wrote: OK, I have my K3/P3 and Navigator correctly hooked up, I think. I am able to receive digital signals like PSK31, no problem. I cannot seem to get any RF output using the Navigator to my P3. I probably have some parameter set up wrong. Any ideas? Tnx de Brian W3BW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Navigator and K3
No problem here. works like a Champ!!! make sure you have the newest version of the Navigator drivers!!! Craig WØLV -- View this message in context: http://elecraft.365791.n2.nabble.com/Navigator-and-K3-tp5487817p5497121.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Navigator and K3
Has anyone used the Navagator US Interface with the K3? If so, were you happy with it? 73 Alan W1HYV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Navigator and K3
I've been using the Navigator with the K3 for a couple of years now and am totally satisfied with it (well almost, see below)! I bought the interface cable from US Interface (which I recommend) and it works great. All the K3 FW upgrades go straight thru with no problem. If you already have the Navigator you know that the setup takes somewhat of an effort to get all the virtual com ports set up. But once that's done is runs like a champ. Here is the almost: I run primarily CW and the built in Winkeyer works OK but there is one problem I have run into. I can't seem to get full QSK to work with the Navigator/Winkeyer/K3. There is always a slight break-in delay even with full QSK set on the K3. It's not usually a problem with normal operation but does effect contesting or DX chasing. I haven't tried to track down a fix for this thru the Navigator group. I usually just switch to the K3 keyer if I really need the QSK. I am sending a copy of this reply to the Navigator group so maybe Clint or someone over there can shed some light on the problem. Hope this helps, Don, K5DW - Original Message - From: Alan Price w1...@arrl.net To: Elecraft elecraft@mailman.qth.net Sent: Wednesday, September 01, 2010 11:34 AM Subject: [Elecraft] Navigator and K3 Has anyone used the Navagator US Interface with the K3? If so, were you happy with it? 73 Alan W1HYV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Navigator and K3
I have been using the Navigator for about 1.5 years, first about a year with a TS-480now about 6 months with the K3. Works flawlesslyexcellent technical support when needed.highly recommended. Jack W4GRJ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Alan Price Sent: Wednesday, September 01, 2010 12:34 PM To: Elecraft Subject: [Elecraft] Navigator and K3 Has anyone used the Navagator US Interface with the K3? If so, were you happy with it? 73 Alan W1HYV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html