Re: [Elecraft] Need a tuning knob for K2

[Frank Krozel]

As usual, Don you have the correct answers, thanks again.

Hope you are doing well!

-73-  FrankKG9H
kg9hfr...@gmail.com




> On Apr 25, 2021, at 9:53 AM, Don Wilhelm  wrote:
> 
> Frank,
> 
> Just take the top cover off and look between the upper 2D connectors and the 
> Front Panel board.
> 
> 73,
> Don W3FPR
> 
> 
> On 4/25/2021 10:34 AM, Frank Krozel wrote:
>> Thanks Don, will check today.
>> 
>> I also need to figure out which K2 need those small 3/8”x3/8” rubber spacers 
>> in-between the PC boards without taking the front panel off.
>> 
>> -73-  FrankKG9H
>> kg9hfr...@gmail.com 
>> 
>> 
>> 
>> 
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Need a tuning knob for K2

[Don Wilhelm]

Frank,

Just take the top cover off and look between the upper 2D connectors and 
the Front Panel board.


73,
Don W3FPR


On 4/25/2021 10:34 AM, Frank Krozel wrote:

Thanks Don, will check today.

I also need to figure out which K2 need those small 3/8”x3/8” rubber 
spacers in-between the PC boards without taking the front panel off.


-73-  Frank    KG9H
kg9hfr...@gmail.com 






__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Need a tuning knob for K2

[Frank Krozel]

Thanks Don, will check today.

I also need to figure out which K2 need those small 3/8”x3/8” rubber spacers 
in-between the PC boards without taking the front panel off.

-73-  FrankKG9H
kg9hfr...@gmail.com




> On Apr 25, 2021, at 9:27 AM, Don Wilhelm  wrote:
> 
> Frank,
> 
> Do you have the new encoder?  I don't know which SN they were started.  That 
> is the key to which knob you need.  If the knob is off, lift the fiber 
> washers and check to see if there is a green tab in the hole to the right of 
> the encoder shaft.  If the hole is empty, you have the new encoder.
> Order the new knob from Elecraft - they no longer have the older knob.
> With the new knob, you need 3 fiber washers stacked.
> 
> 73,
> Don W3FPR
> 
> On 4/25/2021 9:00 AM, Frank Krozel wrote:
>> I am looking for a tuning knob for a K2 SN 5630
>> If I recall there were two different sizes of shafts, this would be the 
>> second (maybe current) size.
>> 
>> This is SN
>> -73-  FrankKG9H
>> kg9hfr...@gmail.com
>> 
>> 
>> 
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to d...@w3fpr.com
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Need a tuning knob for K2

[Don Wilhelm]

Frank,

Do you have the new encoder?  I don't know which SN they were started.  
That is the key to which knob you need.  If the knob is off, lift the 
fiber washers and check to see if there is a green tab in the hole to 
the right of the encoder shaft.  If the hole is empty, you have the new 
encoder.

Order the new knob from Elecraft - they no longer have the older knob.
With the new knob, you need 3 fiber washers stacked.

73,
Don W3FPR

On 4/25/2021 9:00 AM, Frank Krozel wrote:

I am looking for a tuning knob for a K2 SN 5630
If I recall there were two different sizes of shafts, this would be the second 
(maybe current) size.

This is SN
-73-  FrankKG9H
kg9hfr...@gmail.com




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to d...@w3fpr.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Need a tuning knob for K2

[Frank Krozel]

I am looking for a tuning knob for a K2 SN 5630
If I recall there were two different sizes of shafts, this would be the second 
(maybe current) size.

This is SN 
-73-  FrankKG9H
kg9hfr...@gmail.com




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com