I sent Steve this answer off list...but it also answers Clark's
missing R116 question...so I'm posting it to the full list.
dk
Steve...I ran into this same issue with mine a couple of weeks ago and
when I checked with Scott
at Elecraft parts, he said the small green/brown/green was R116 which
goes across toroid
L33 in the BFO section (pg58).
I counted all my RF chokes and compared them to the parts list and
found the parts count
showed a regular sized brown/black/brown so I used that.
I think they need to learn the difference between a miniature and
sub-miniature!
Also, I couldn't get up to 6V on page 61, the VCO alignment stage...I
would max out at
3.8 volts...and I had the windings correct on T-5, the correct part at
C72 and the
correct value at L30...and when I asked and even sent a photo of the
toriod, Gary said I
should try to squeezing the windings closer together (rather than
leaving them uniformly
spread out to ensure 85% coverage of the toriod as they stress over
and over)...I moved
them (pinched) closer and it immediately solved the problem....that
little tip would be
nice to have show up somewhere in the book, also!
David King
KE7EKA
Quoting [EMAIL PROTECTED]:
Hello,
I was wondering if anyone else has built a K2 lately. I am in build phase
II and I am to install an RF Choke on the back of the board, it's item ID
is RFC15. The manual says to expect a sub miniature with
Brown-Black-Brown. However, my sub miniature RF Choke is
Green-Brown-Green. Is this a recent change that is not noted in the
construction manual?
Best Regards,
Steve
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
