Re: [Elecraft] P3: Span limits move when changing bands
It happens with two different OSs and two different programs. The best place to look first is the common elements. 73 Bill AE6JV On 10/26/18 at 5:00 PM, ghyoung...@gmail.com (Grant Youngman) wrote: Why do you presume it is a fault of the P3 and not something funky happening with whatever software you’re running on your PC? Grant NQ5T K3 #2091 KX3 #8342 On Oct 26, 2018, at 7:46 PM, Bill Frantz wrote: I have the same problem with wsjt-x running from a Mac. When I change bands, the center frequency changes. Very annoying since it moves part of the display outside of the 17M and 12M bands. 73 Bill AE6JV On 10/26/18 at 2:47 PM, k6...@foothill.net (Fred Jensen) wrote: I think that may be a clue Ed, my K3 is ancient [#642] but has current FW and new synth. The computer connects to it and the P3 connects to the K3 serial port ... otherwise fixed-tune mode wouldn't work. I've never seen the issue when changing bands with the BAND U/D switch, or from macros executed from the KPOD, only when the commands start at the computer and go thru the P3 to the K3. N1MM+ is the only control software I use. --- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to fra...@pwpconsult.com --- Bill Frantz| If you want total security, go to prison. There you're 408-356-8506 | fed, clothed, given medical care and so on. The only www.pwpconsult.com | thing lacking is freedom. - Dwight D. Eisenhower __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
Why do you presume it is a fault of the P3 and not something funky happening with whatever software you’re running on your PC? Grant NQ5T K3 #2091 KX3 #8342 > On Oct 26, 2018, at 7:46 PM, Bill Frantz wrote: > > I have the same problem with wsjt-x running from a Mac. When I change bands, > the center frequency changes. Very annoying since it moves part of the > display outside of the 17M and 12M bands. > > 73 Bill AE6JV > > On 10/26/18 at 2:47 PM, k6...@foothill.net (Fred Jensen) wrote: > >> I think that may be a clue Ed, my K3 is ancient [#642] but has current FW >> and new synth. The computer connects to it and the P3 connects to the K3 >> serial port ... otherwise fixed-tune mode wouldn't work. I've never seen >> the issue when changing bands with the BAND U/D switch, or from macros >> executed from the KPOD, only when the commands start at the computer and go >> thru the P3 to the K3. N1MM+ is the only control software I use. > > --- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
I have the same problem with wsjt-x running from a Mac. When I change bands, the center frequency changes. Very annoying since it moves part of the display outside of the 17M and 12M bands. 73 Bill AE6JV On 10/26/18 at 2:47 PM, k6...@foothill.net (Fred Jensen) wrote: I think that may be a clue Ed, my K3 is ancient [#642] but has current FW and new synth. The computer connects to it and the P3 connects to the K3 serial port ... otherwise fixed-tune mode wouldn't work. I've never seen the issue when changing bands with the BAND U/D switch, or from macros executed from the KPOD, only when the commands start at the computer and go thru the P3 to the K3. N1MM+ is the only control software I use. --- Bill Frantz| There's nothing so clear as | Periwinkle (408)356-8506 | a design you haven't written | 16345 Englewood Ave www.pwpconsult.com | down.- Dean Tribble | Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
I think that may be a clue Ed, my K3 is ancient [#642] but has current FW and new synth. The computer connects to it and the P3 connects to the K3 serial port ... otherwise fixed-tune mode wouldn't work. I've never seen the issue when changing bands with the BAND U/D switch, or from macros executed from the KPOD, only when the commands start at the computer and go thru the P3 to the K3. N1MM+ is the only control software I use. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 10/26/2018 2:30 PM, AB4IQ wrote: Sorry guys but N1MM+ works fine here. I went to several bands and modes with no change in the P3's span. I am running WIN4K3SUITE and COM0COM and all three programs at the same time with no issues. I am using just a standard (Printer Cable) to the PC but it is connected to the K3S rather than the P3. I thought it ran to the P3 at first but after further inspection I was wrong. (as Usual) Ed..AB4IQ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of AB4IQ Sent: Friday, October 26, 2018 4:13 PM To: 'Fred Jensen' ; elecraft@mailman.qth.net Subject: Re: [Elecraft] P3: Span limits move when changing bands I guess maybe I need to fire up N1MM+ to see what happens here. Dxbase seems to work fine and so does DX4WIN. Ed.. AB4IQ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred Jensen Sent: Friday, October 26, 2018 3:52 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3: Span limits move when changing bands It may be a timing issue. It only happens when the software [N1MM+ in my case] sends a frequency command. It rarely happens for me when I make the first frequency change. Returning to the first band, it usually happens. And you're right, it is annoying. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 10/26/2018 10:01 AM, Randy Farmer wrote: First sent this to Skip rather than the list... This appears to have been a problem from the time of the introduction of the P3. It seems to be triggered when a frequency command is issued to the radio via the P3 comm port. Is there any hope on the horizon for curing this extremely annoying "feature"? There's absolutely NO reason for the P3 to decide to change the span limits by itself once they've been set up on a band. Maybe if we complain every couple of months someone at Elecraft will take notice and get it fixed. 73... Randy, W8FN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ab...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ab...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
Sorry guys but N1MM+ works fine here. I went to several bands and modes with no change in the P3's span. I am running WIN4K3SUITE and COM0COM and all three programs at the same time with no issues. I am using just a standard (Printer Cable) to the PC but it is connected to the K3S rather than the P3. I thought it ran to the P3 at first but after further inspection I was wrong. (as Usual) Ed..AB4IQ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of AB4IQ Sent: Friday, October 26, 2018 4:13 PM To: 'Fred Jensen' ; elecraft@mailman.qth.net Subject: Re: [Elecraft] P3: Span limits move when changing bands I guess maybe I need to fire up N1MM+ to see what happens here. Dxbase seems to work fine and so does DX4WIN. Ed.. AB4IQ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred Jensen Sent: Friday, October 26, 2018 3:52 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3: Span limits move when changing bands It may be a timing issue. It only happens when the software [N1MM+ in my case] sends a frequency command. It rarely happens for me when I make the first frequency change. Returning to the first band, it usually happens. And you're right, it is annoying. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 10/26/2018 10:01 AM, Randy Farmer wrote: > First sent this to Skip rather than the list... > >> This appears to have been a problem from the time of the introduction >> of the P3. It seems to be triggered when a frequency command is >> issued to the radio via the P3 comm port. Is there any hope on the >> horizon for curing this extremely annoying "feature"? There's >> absolutely NO reason for the P3 to decide to change the span limits >> by itself once they've been set up on a band. Maybe if we complain >> every couple of months someone at Elecraft will take notice and get >> it fixed. >> >> 73... >> Randy, W8FN >> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ab...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ab...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
I believe I heard of this "problem" before. It needs to be addressed with the N1MM+ folks for a possible fix. 73, Don W3FPR On 10/26/2018 4:52 PM, Fred Jensen wrote: It may be a timing issue. It only happens when the software [N1MM+ in my case] sends a frequency command. It rarely happens for me when I make the first frequency change. Returning to the first band, it usually happens. And you're right, it is annoying. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 10/26/2018 10:01 AM, Randy Farmer wrote: First sent this to Skip rather than the list... This appears to have been a problem from the time of the introduction of the P3. It seems to be triggered when a frequency command is issued to the radio via the P3 comm port. Is there any hope on the horizon for curing this extremely annoying "feature"? There's absolutely NO reason for the P3 to decide to change the span limits by itself once they've been set up on a band. Maybe if we complain every couple of months someone at Elecraft will take notice and get it fixed. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
I guess maybe I need to fire up N1MM+ to see what happens here. Dxbase seems to work fine and so does DX4WIN. Ed.. AB4IQ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred Jensen Sent: Friday, October 26, 2018 3:52 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3: Span limits move when changing bands It may be a timing issue. It only happens when the software [N1MM+ in my case] sends a frequency command. It rarely happens for me when I make the first frequency change. Returning to the first band, it usually happens. And you're right, it is annoying. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 10/26/2018 10:01 AM, Randy Farmer wrote: > First sent this to Skip rather than the list... > >> This appears to have been a problem from the time of the introduction >> of the P3. It seems to be triggered when a frequency command is >> issued to the radio via the P3 comm port. Is there any hope on the >> horizon for curing this extremely annoying "feature"? There's >> absolutely NO reason for the P3 to decide to change the span limits >> by itself once they've been set up on a band. Maybe if we complain >> every couple of months someone at Elecraft will take notice and get >> it fixed. >> >> 73... >> Randy, W8FN >> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ab...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
It may be a timing issue. It only happens when the software [N1MM+ in my case] sends a frequency command. It rarely happens for me when I make the first frequency change. Returning to the first band, it usually happens. And you're right, it is annoying. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 10/26/2018 10:01 AM, Randy Farmer wrote: First sent this to Skip rather than the list... This appears to have been a problem from the time of the introduction of the P3. It seems to be triggered when a frequency command is issued to the radio via the P3 comm port. Is there any hope on the horizon for curing this extremely annoying "feature"? There's absolutely NO reason for the P3 to decide to change the span limits by itself once they've been set up on a band. Maybe if we complain every couple of months someone at Elecraft will take notice and get it fixed. 73... Randy, W8FN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
I just went thru my 2 K3S's and K3 all attached to different P3's with my cable attached to the P3's comm ports and for some reason do not have the same issue. My span limits on all three have stayed the same from 6 to 160 meters. I'm using three different PC's with two of them using Windows 10 Pro and one using Windows 7 Pro. I used Dxbase to change the frequency of all three rigs from Cluster spots. Don't know why mine doesn't have the same issues. Luck I guess.. Ed.. AB4IQ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of K9MA Sent: Friday, October 26, 2018 1:12 PM To: w...@tx.rr.com Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] P3: Span limits move when changing bands I haven't noticed that large a shift, but sometimes 0.5 kHz or so. Scott K9MA -- Scott Ellington --- via iPad > On Oct 26, 2018, at 8:01 PM, Randy Farmer wrote: > > First sent this to Skip rather than the list... > >> This appears to have been a problem from the time of the introduction of the P3. It seems to be triggered when a frequency command is issued to the radio via the P3 comm port. Is there any hope on the horizon for curing this extremely annoying "feature"? There's absolutely NO reason for the P3 to decide to change the span limits by itself once they've been set up on a band. Maybe if we complain every couple of months someone at Elecraft will take notice and get it fixed. >> >> 73... >> Randy, W8FN >> >>> On 8/31/2018 5:07 PM, Fred Jensen wrote: >>> FW: 1.60 >>> Fixed Tune mode >>> No SVGA >>> Connected to K3 RS-232 serial port >>> >>> The "span window" on my P3 will often move up by exactly 5 KHz when I change bands. For example, on 40 with a 20 KHz span and the span window going from 7020 to 7040, if I go to another band and then come back to 40, the span will now be 7025 to 7045. Is this normal? Have I missed a menu option? >>> >>> It does this most of the time, sometimes the span window stays put where I left it. I think it has some connection to where in the span window the cursor is, but so far, I haven't been able to reverse engineer that. I'd really like it to retain whatever span window limits I've set for each band. >>> >>> 73, >>> >>> Fred ["Skip"] K6DGW >>> Sparks NV DM09dn >>> Washoe County >> > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > k...@sdellington.us __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ab...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
I haven't noticed that large a shift, but sometimes 0.5 kHz or so. Scott K9MA -- Scott Ellington --- via iPad > On Oct 26, 2018, at 8:01 PM, Randy Farmer wrote: > > First sent this to Skip rather than the list... > >> This appears to have been a problem from the time of the introduction of the >> P3. It seems to be triggered when a frequency command is issued to the radio >> via the P3 comm port. Is there any hope on the horizon for curing this >> extremely annoying "feature"? There's absolutely NO reason for the P3 to >> decide to change the span limits by itself once they've been set up on a >> band. Maybe if we complain every couple of months someone at Elecraft will >> take notice and get it fixed. >> >> 73... >> Randy, W8FN >> >>> On 8/31/2018 5:07 PM, Fred Jensen wrote: >>> FW: 1.60 >>> Fixed Tune mode >>> No SVGA >>> Connected to K3 RS-232 serial port >>> >>> The "span window" on my P3 will often move up by exactly 5 KHz when I >>> change bands. For example, on 40 with a 20 KHz span and the span window >>> going from 7020 to 7040, if I go to another band and then come back to 40, >>> the span will now be 7025 to 7045. Is this normal? Have I missed a menu >>> option? >>> >>> It does this most of the time, sometimes the span window stays put where I >>> left it. I think it has some connection to where in the span window the >>> cursor is, but so far, I haven't been able to reverse engineer that. I'd >>> really like it to retain whatever span window limits I've set for each band. >>> >>> 73, >>> >>> Fred ["Skip"] K6DGW >>> Sparks NV DM09dn >>> Washoe County >> > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k...@sdellington.us __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
First sent this to Skip rather than the list... This appears to have been a problem from the time of the introduction of the P3. It seems to be triggered when a frequency command is issued to the radio via the P3 comm port. Is there any hope on the horizon for curing this extremely annoying "feature"? There's absolutely NO reason for the P3 to decide to change the span limits by itself once they've been set up on a band. Maybe if we complain every couple of months someone at Elecraft will take notice and get it fixed. 73... Randy, W8FN On 8/31/2018 5:07 PM, Fred Jensen wrote: FW: 1.60 Fixed Tune mode No SVGA Connected to K3 RS-232 serial port The "span window" on my P3 will often move up by exactly 5 KHz when I change bands. For example, on 40 with a 20 KHz span and the span window going from 7020 to 7040, if I go to another band and then come back to 40, the span will now be 7025 to 7045. Is this normal? Have I missed a menu option? It does this most of the time, sometimes the span window stays put where I left it. I think it has some connection to where in the span window the cursor is, but so far, I haven't been able to reverse engineer that. I'd really like it to retain whatever span window limits I've set for each band. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
It's in fixed-tune mode. The span window width stays constant, as it should, it's positioning in the band changes, always by +5 KHz. Another reply advised in a direct email that this is indeed a "feature" and is related to how the band change is initiated. I can't think of a reason why it would be useful but it is really just an annoyance. The P3 is approaching maturity if not already there and perhaps development and firmware updates are becoming less common. Incidentally, I haven't touched the alignment of my K2 since you repaired and aligned it after a u-processor failure several years ago, and it is still performing perfectly. [:=) 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 8/31/2018 3:59 PM, Don Wilhelm wrote: Skip, The P3 span is the same in both cases (20kHz). If your P3 is set to Tracking mode, you can expect that if your K3 VFO has been changed from 7030kHz to somewhat above that frequency (VFO frequency is always in the middle of the display). If your P3 is in Fixed mode, I believe it should stay fixed to your selected frequency span with no change, but I have not verified that is true. If you are in Fixed mode and it changes, I do not have an answer for that. 73, Don W3FPR On 8/31/2018 6:07 PM, Fred Jensen wrote: FW: 1.60 Fixed Tune mode No SVGA Connected to K3 RS-232 serial port The "span window" on my P3 will often move up by exactly 5 KHz when I change bands. For example, on 40 with a 20 KHz span and the span window going from 7020 to 7040, if I go to another band and then come back to 40, the span will now be 7025 to 7045. Is this normal? Have I missed a menu option? It does this most of the time, sometimes the span window stays put where I left it. I think it has some connection to where in the span window the cursor is, but so far, I haven't been able to reverse engineer that. I'd really like it to retain whatever span window limits I've set for each band. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3: Span limits move when changing bands
Skip, The P3 span is the same in both cases (20kHz). If your P3 is set to Tracking mode, you can expect that if your K3 VFO has been changed from 7030kHz to somewhat above that frequency (VFO frequency is always in the middle of the display). If your P3 is in Fixed mode, I believe it should stay fixed to your selected frequency span with no change, but I have not verified that is true. If you are in Fixed mode and it changes, I do not have an answer for that. 73, Don W3FPR On 8/31/2018 6:07 PM, Fred Jensen wrote: FW: 1.60 Fixed Tune mode No SVGA Connected to K3 RS-232 serial port The "span window" on my P3 will often move up by exactly 5 KHz when I change bands. For example, on 40 with a 20 KHz span and the span window going from 7020 to 7040, if I go to another band and then come back to 40, the span will now be 7025 to 7045. Is this normal? Have I missed a menu option? It does this most of the time, sometimes the span window stays put where I left it. I think it has some connection to where in the span window the cursor is, but so far, I haven't been able to reverse engineer that. I'd really like it to retain whatever span window limits I've set for each band. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3: Span limits move when changing bands
FW: 1.60 Fixed Tune mode No SVGA Connected to K3 RS-232 serial port The "span window" on my P3 will often move up by exactly 5 KHz when I change bands. For example, on 40 with a 20 KHz span and the span window going from 7020 to 7040, if I go to another band and then come back to 40, the span will now be 7025 to 7045. Is this normal? Have I missed a menu option? It does this most of the time, sometimes the span window stays put where I left it. I think it has some connection to where in the span window the cursor is, but so far, I haven't been able to reverse engineer that. I'd really like it to retain whatever span window limits I've set for each band. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com