Re: [Elecraft] P3 Query
David, Simply press the MENU button on the front of the P3, then using the SELECT knob, scroll through the menu until you get to "VFO CURSOR TYPE" . Then press the SELECT knob in to toggle between U and BAR . 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Query-tp7579698p7579700.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Query
Menu - Cursors. Tapping select will toggle between the vertical bar and "U" cursors. IITM! 73, ... Joe, W4TV On 10/7/2013 7:59 PM, David Bunte wrote: I have recently set up a K3,P3 & KPA500 for a older ham friend. Today when I was visiting him, he pointed out that the "cursor" on his P3 is no longer a "colored vertical bar", which changes width with the width control on the K3, but it is now just a colored bar at the base line of the trace, with small vertical edges to show the width of the passband. He would like the full vertical bar back again, and cannot recall what he pushed that changed it from the way it was when I was last at his QTH. I know I am not too bright, so it is probably right under my nose, but I can't find how to change that back to the vertical bar. Any help is appreciated. 73 de Dave - K9FN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 Query
I have recently set up a K3,P3 & KPA500 for a older ham friend. Today when I was visiting him, he pointed out that the "cursor" on his P3 is no longer a "colored vertical bar", which changes width with the width control on the K3, but it is now just a colored bar at the base line of the trace, with small vertical edges to show the width of the passband. He would like the full vertical bar back again, and cannot recall what he pushed that changed it from the way it was when I was last at his QTH. I know I am not too bright, so it is probably right under my nose, but I can't find how to change that back to the vertical bar. Any help is appreciated. 73 de Dave - K9FN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 query
On 10/13/2012 10:32 PM, Ross Biggar wrote: > I use my P3 for weak signal work. > Is it possible to expand the scale, so say 150 to 120db is what I want to see, You want exactly the opposite to see weak signals. The scale setting is the DIFFERENCE between the top and bottom of the display. 150-180 dB is very INSENSITIVE. You want a very SENSITIVE setting, but no so sensitive that it gets blown away by big signals and noise. I usually set my scale at 42 dB for contests, where there are a lot of very strong signals, and at 24 dB for routine operation. I find that 24dB shows weak signals that I can't hear It's VERY important that AVERAGING be ON, and set for it's highest setting. A scale of perhaps 12-18 dB is about as low as I would go for showing very weak signals. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 query
I use my P3 for weak signal work. Is it possible to expand the scale, so say 150 to 120db is what I want to see, rather than 150 to 90? Thanks Ross ZL1WN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
