Re: [Elecraft] PAN Adaptor interface question
Took me a couple of hours - but, I work slowly and am very careful. I do not have the P3 and now doubt if I ever will. The K3 failed several weeks after the installation was done. Unknown if one factor is related to the other. Bill W2BLC -- IN GOD I TRUST (but, NOT a single politician) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] PAN Adaptor interface question
I think that I need to add KXV3a to my K3 if I want to connect a PAN adaptor or P3 of some sort. So do I have the right item identified. Currently I do not have that option installed. It seems a low cost item but the bigger question is what is a reasonable amout of time required to install it. I have a K3 100w version with no sub receiver. Thanks ~73 Don KD8NNU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] PAN Adaptor interface question
Hi Don, Yes you will need the KXV3A. I originally did not have the KXV3A and I later added it to my K3. It is a very easy option to install. That was a few years ago but I would venture to say that it took far less than one hour. You'll have to first remove the I/O board. This is the board with the RS232 and ACC connectors. Be extremely careful not to over tighten the standoffs on either side of those two connectors when you reinstall this board. After installation it is necessary to change CONFIG:KXV3 from NOT INST to NOR. 73, Mike K2MK goldtr8 wrote I think that I need to add KXV3a to my K3 if I want to connect a PAN adaptor or P3 of some sort. So do I have the right item identified. Currently I do not have that option installed. It seems a low cost item but the bigger question is what is a reasonable amout of time required to install it. I have a K3 100w version with no sub receiver. Thanks ~73 Don KD8NNU -- View this message in context: http://elecraft.365791.n2.nabble.com/PAN-Adaptor-interface-question-tp7560377p7560385.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
