[Elecraft] PF->RX EQ setting on K3
For CW reception of weak 160m DX, I recently tried tweaking up the RX EQ so that the sidetone frequency is enhanced and other frequencies are attenuated. I think this works quite well as a primitive extra audio filter. While the settings are great for CW, they are no good (obviously) for speech. Does anyone know if such a "home brew" AF filter CW response curve setting could be stored using say PF1 button, and then be reset to a flat response using say PF2? Otherwise it gets fiddly and time-consuming to keep tweaking each of the eight filter frequencies. This would be handy 73 Geoff G3XGC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] PF->RX EQ setting on K3
In fact digi setting can also be different. May be saving EQ settings along with other settings as "profile" in M1-M4 would be handy. Rec button could be used for resetting to default. 73, Igor UA9CDC For CW reception of weak 160m DX, I recently tried tweaking up the RX EQ so that the sidetone frequency is enhanced and other frequencies are attenuated. I think this works quite well as a primitive extra audio filter. While the settings are great for CW, they are no good (obviously) for speech. Does anyone know if such a "home brew" AF filter CW response curve setting could be stored using say PF1 button, and then be reset to a flat response using say PF2? Otherwise it gets fiddly and time-consuming to keep tweaking each of the eight filter frequencies. This would be handy 73 Geoff G3XGC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] PF->RX EQ setting on K3
abt a month ago I wrote a long response on why not a parametric eq for cw ??? but trashed it . for cw would not a parametric implementation be better than the "graphic" audio eq ? or is that already happening in the dsp ??? bill At 02:28 PM 11/7/2008, Igor Sokolov wrote: In fact digi setting can also be different. May be saving EQ settings along with other settings as "profile" in M1-M4 would be handy. Rec button could be used for resetting to default. 73, Igor UA9CDC For CW reception of weak 160m DX, I recently tried tweaking up the RX EQ so that the sidetone frequency is enhanced and other frequencies are attenuated. I think this works quite well as a primitive extra audio filter. While the settings are great for CW, they are no good (obviously) for speech. Does anyone know if such a "home brew" AF filter CW response curve setting could be stored using say PF1 button, and then be reset to a flat response using say PF2? Otherwise it gets fiddly and time-consuming to keep tweaking each of the eight filter frequencies. This would be handy 73 Geoff G3XGC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] PF->RX EQ setting on K3
Geoff Cottrell G3XGC wrote: > > and then > be reset to a flat response using say PF2? > Hi, You can use the rit CLR button to reset to a flat response. I'd like to see an equaliser memory setting for each mode. I'm getting tired of wondering why the NR isn't working as well as usual on SSB, only to find it's because I've peaked the rx equalisers 800Hz response for CW. 73 Doug -- View this message in context: http://n2.nabble.com/PF-%3ERX-EQ-setting-on-K3-tp1471080p1476270.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com