Re: [Elecraft] PR6 Preamp - "control connection"
It is also very important to use the small disconnect adapter that came with the cable kit to make sure the pin 11 connection is not made at the KPA500. Pin 11 of the KPA500 is not compatible with the PR6's control pin, and must not be connected to it. - Jack Brindle, W6FB Sent from my iPad > On Dec 26, 2014, at 8:30 PM, Cady, Fred wrote: > > Hi Joe, > If you purchased the KPAK3AUX cable set with your KPA500 you should have a > 15-pin Y-cable adapter. If not you can get one from Elecraft or another > vendor. Be sure to NOT use a VGA y-cable. > Simply put the y-cable on the back of the K3 and plug the control cable for > the PR6 into one leg and the KPA into the other. > > Cheers and 73, > Fred KE7X > Author of: > "The Elecraft K3: Design, Configuration and Operation 2nd ed" > "The Elecraft KX3 - Going for the summit" > "The Elecraft KPA500 and KAT500 - the K-Line Dream Station" > Printed, coil bound copies of these are all available at www.elecraft.com > KPA500 and KAT500 Quick Set Up Guide > http://www.ke7x.com/home/k-line-introduction-and-set-up-guide > KAT500 and KXPA500 Tuner Operation > http://www.ke7x.com/home/kat500-and-kxpa100-tuners > > KE7X > > > > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joseph > Carter > Sent: Friday, December 26, 2014 6:35 PM > To: Elecraft > Subject: [Elecraft] PR6 Preamp - "control connection" > > My wonderful XYL gave me the PR6 for Christmas - trying to figure out how to > connect the "control wire" as I have the cable to the KAT500 / KPA500 already > in the ACC socket - the instructions say if the ACC is in use to just connect > the control wire to pin 11. > Anyone have an easy way to do this? > I have the Elecraft cables which are all molded so no access to the back of > the connectors. > I can't seem to find a "VGA" breakout box. > Thanks es 73. > de Joe, w9jc > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to fc...@ece.montana.edu > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jackbrin...@me.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PR6 Preamp - "control connection"
Hi Joe, If you purchased the KPAK3AUX cable set with your KPA500 you should have a 15-pin Y-cable adapter. If not you can get one from Elecraft or another vendor. Be sure to NOT use a VGA y-cable. Simply put the y-cable on the back of the K3 and plug the control cable for the PR6 into one leg and the KPA into the other. Cheers and 73, Fred KE7X Author of: "The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 - Going for the summit" "The Elecraft KPA500 and KAT500 - the K-Line Dream Station" Printed, coil bound copies of these are all available at www.elecraft.com KPA500 and KAT500 Quick Set Up Guide http://www.ke7x.com/home/k-line-introduction-and-set-up-guide KAT500 and KXPA500 Tuner Operation http://www.ke7x.com/home/kat500-and-kxpa100-tuners KE7X -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joseph Carter Sent: Friday, December 26, 2014 6:35 PM To: Elecraft Subject: [Elecraft] PR6 Preamp - "control connection" My wonderful XYL gave me the PR6 for Christmas - trying to figure out how to connect the "control wire" as I have the cable to the KAT500 / KPA500 already in the ACC socket - the instructions say if the ACC is in use to just connect the control wire to pin 11. Anyone have an easy way to do this? I have the Elecraft cables which are all molded so no access to the back of the connectors. I can't seem to find a "VGA" breakout box. Thanks es 73. de Joe, w9jc __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to fc...@ece.montana.edu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PR6 Preamp - "control connection"
Joe - My ACCY plug (which I'm almost sure came from Elecraft) has two Phillips head screws on one side for taking the shell apart. They're black, and easily overlooked. GL & 73, Mike NF4L > On Dec 26, 2014, at 8:34 PM, Joseph Carter wrote: > > My wonderful XYL gave me the PR6 for Christmas - trying to figure out how > to connect the "control wire" as I have the cable to the KAT500 / KPA500 > already in the ACC socket - the instructions say if the ACC is in use to > just connect the control wire to pin 11. > Anyone have an easy way to do this? > I have the Elecraft cables which are all molded so no access to the back of > the connectors. > I can't seem to find a "VGA" breakout box. > Thanks es 73. > de Joe, w9jc > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] PR6 Preamp - "control connection"
My wonderful XYL gave me the PR6 for Christmas - trying to figure out how to connect the "control wire" as I have the cable to the KAT500 / KPA500 already in the ACC socket - the instructions say if the ACC is in use to just connect the control wire to pin 11. Anyone have an easy way to do this? I have the Elecraft cables which are all molded so no access to the back of the connectors. I can't seem to find a "VGA" breakout box. Thanks es 73. de Joe, w9jc __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com