Manolo,
You simply connect the PR6 to the RX IN/OUT on the KXV3. To use it just tap
the RX ANT button. On RX your signal path will go from ANT1 or ANT2 as
selected to the RX OUT, through the PR6 and back in through the RX IN. On
TX of course it just goes out to the antenna you have selected.
Make sure you set up the PR6 per the instructions.
73
Greg
AB7R
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]on Behalf Of EC7ANC Manolo
Sent: Tuesday, December 23, 2008 2:40 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] PR6 use with 1 antenna
Good evening elecrafters,
As I only have one antenna for 6 meters, I wonder how I could use the PR6
for TX and RX with that antenna?
Merry Christmast to the group.
Manolo EC7ANC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
