After how many years? I finally fixed the intermittent sensitivity issue I
had with my K2. The problem was not a latching relay but a cap on the
bottom of the main board. The legs of this cap protrude under the NB
option. I noticed that one of the legs had not been soldered through the
hole properly.
I was too busy and hurried to fix that I did not note the part number... but
anyway... this may help somebody else in the future.
Kind regards all...
Dave
VK2NA
David Walker-8 wrote:
Hi folks,
Occasionally I find the PRE/ATT fails to work. Sometimes the PREamp
works, sometimes it doesn't. Sometimes the ATTinuator is louder than
normal mode.
I should have a replacement relay coming with my KPA upgrade - but I ask
could it be something else?
This is only a problem on rare occasions, but when it happens it is
annoying.
PS I've retouched the solder to rule out a dodgy connection to the relay.
Dave
VK2NA
SN 3222
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
View this message in context:
http://n2.nabble.com/PRE-ATT-intermittent-fault-tp444959p4269545.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html