I was looking at the PX3 this morning, listening on 40m, and you could make a
small display change to do #5 (well the second #5).If the moving 'tick'
marks at the top of the display went down instead of up, and the top line of
the display was 'thickened' representing the full band, then the display
window could be shown as a light green section of the band. The same as the
rx bandwidth is shown on the center cursor. As you tuned in the band, the
green visible bandwidth within the full band would move giving you a sense of
where you are within the band.
And I'm probably just in experienced with the PX3, but how do others tune to
get something seen near the noise ? Often I see something to check out, and
once I start tuning for the signal I loose my context and either undershoot or
overshoot the faint signal i was looking for.I understand the use of the
Markers to so this, but just to do tune / look I us
On May 27, 2016, at 3:31 PM, etks...@gmail.com wrote:
> I recently bought a PX3 for my KX3, and I really love it. I had played with
> panadapter software on my computer, but since I use a Mac the offerings are
> rather limited and even using Windows in a VM getting it to work the way I
> wanted was cumbersome to say the least.
>
> The PX3 is great since it’s basically plug and play, and its size and
> portability are awesome!
>
> So after having used it for a couple of weeks I have some comments. I guess
> most/all are related to waterfall since I find that the most useful aspect of
> the product. I live in a condo so due to antenna limitations and noise floor
> the spectrum display alone isn’t very useful.
>
> 1) The Freeze feature freezes everything. It would be really great if it
> would just stop the waterfall (maybe the spectrum too), but still allow
> manipulation of other elements, e.g. markers. I would use it if I were to
> see something I want to look at but maybe about to go off screen, so I’d like
> to move a marker over to that in order to switch frequencies, etc.
>
> 2) Allow the marker line itself to extend into the waterfall, not just for
> history, to allow aligning with historical data. It would be useful to align
> with signals that are there but have not scrolled off yet.
>
> 3) Move the waterfall data on the screen when shifting frequencies in
> tracking mode. I know you won’t have data for the new parts of the spectrum
> coming into view, but it’s hard for the user to readjust to shifting data
> that no longer corresponds to the spectrum above. The same goes for fixed
> mode if you configure to jump a half span.
>
> 4) Add something like a 3/4 - 1/4 FixMode option. As I’m scrolling up
> frequency (or down) I have to wait til I get all the way to the end to see
> what’s ahead. Of course enhancing tracking mode as above might obviate the
> need for this.
>
> 5) Or maybe add a “shift view” that I can set to a Fn button and rotate the
> know to move the display left or right. Currently I do this by switching to
> tracking mode to center the current frequency and then back to fixed. Or
> maybe have “Center” in fixed mode center the current frequency?
>
> 5) Add a full-band view. I know you won’t necessarily have full-width data
> due to bandwidth limitations but it’s nice to see where you are in the entire
> band. Just a nice-to-have thing.
>
> 6) Add visual band end markers. Also just nice-to-have.
>
> 7) One quirk I see is when switching the tracking mode the Ref level is
> different. It reports the same value in each, but the base level is
> obviously different based on the spectrum display behaviour and I have to
> readjust it every time.
>
> Thanks for listening!
>
>
> Thanks and 73,
> Erik Tkal - W1QED
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nskou...@ecsecurityinc.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com