Re: [Elecraft] Possibly dumb question
I contacted Win4K3Suite support and Tom, VA2FSQ says it should work as Jim, N7US and I described, but make sure both radios have the same firmware version. 73, Mark, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of B. Sent: Monday, April 1, 2019 03:46 To: elecraft@mailman.qth.net Subject: [Elecraft] Possibly dumb question Hi Folks, Thanks to all for the response to my question. While I do not intend to upload the configuration of one K3 to another, I do want to have the MENU and CONFIG information pulled from the radio. It appears that Win4K3suite will do this and I have downloaded the 30 day free trial version to play with and will go from there. Thanks again for the great information. This is a great list for the best radio I have ever owned. 73, Bob AD7Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Possibly dumb question
Hi Folks, Thanks to all for the response to my question. While I do not intend to upload the configuration of one K3 to another, I do want to have the MENU and CONFIG information pulled from the radio. It appears that Win4K3suite will do this and I have downloaded the 30 day free trial version to play with and will go from there. Thanks again for the great information. This is a great list for the best radio I have ever owned. 73, Bob AD7Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
K3_EZ might do the trick, but I can't get it to install anymore. Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
I understand the configuration file saved by the K3 Utility is serialized for the specific radio. To load or restore, the serial number in the file must match the serial number embedded in the radio. 73 Bob, K4TAX On 3/31/2019 8:08 PM, Nr4c wrote: No way to do this. Sorry. Sent from my iPhone ...nr4c. bill On Mar 31, 2019, at 5:56 PM, B. wrote: Hi Folks, I have been trying to find a way to "dump" or list out all the settings in my K3s for the MENU options as well as the settings for the CONFIG options without going through the front panel display and writing them all down. The reason is to be able to make the same settings on another K3s, again without having to sit and go through the settings one by one and write them down. I did use the K3s utility to make a configuration file and saved it but if I try to look at the file, I get what looks like gibberish and it is not easily interpreted. Maybe there is another program that can make the configuration file readable? Am I missing an easy way to do this? Is there something I have not found in the utility program that will do this? Is it possible to list the settings at all, other than the front panel? Thanks for the help. 73, Bob AD7Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
No way to do this. Sorry. Sent from my iPhone ...nr4c. bill > On Mar 31, 2019, at 5:56 PM, B. wrote: > > Hi Folks, > > > > I have been trying to find a way to "dump" or list out all the settings in > my K3s for the MENU options as well as the settings for the CONFIG options > without going through the front panel display and writing them all down. > > > > The reason is to be able to make the same settings on another K3s, again > without having to sit and go through the settings one by one and write them > down. I did use the K3s utility to make a configuration file and saved it > but if I try to look at the file, I get what looks like gibberish and it is > not easily interpreted. Maybe there is another program that can make the > configuration file readable? > > > > Am I missing an easy way to do this? Is there something I have not found in > the utility program that will do this? Is it possible to list the settings > at all, other than the front panel? > > > > Thanks for the help. > > 73, > > Bob > > AD7Z > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
Win4K3Suite saves the configuration to an .XML file. I don't know if it can be loaded on a different radio or not. The items populate a screen, so a screenshot could be saved as well. I opened the .XML file as a table in Excel, but the screenshot would be more usable/readable as it has configuration items from the K3 programmer's manual. Jim N7US -Original Message- Well, wait long enough or take to long thinking about it and someone who really knows the answer I gave will pop in and say "Yes, you can do that" before you do. HI Thanks Jim. I was pretty sure we could do that with Win4K3Suite. Have you done it? Mark, WB9CIF -Original Message- VA2FSQ's Win4K3Suite can do that. https://va2fsq.com/ Jim N7US -Original Message- Hi Folks, I have been trying to find a way to "dump" or list out all the settings in my K3s for the MENU options as well as the settings for the CONFIG options without going through the front panel display and writing them all down. The reason is to be able to make the same settings on another K3s, again without having to sit and go through the settings one by one and write them down. I did use the K3s utility to make a configuration file and saved it but if I try to look at the file, I get what looks like gibberish and it is not easily interpreted. Maybe there is another program that can make the configuration file readable? Am I missing an easy way to do this? Is there something I have not found in the utility program that will do this? Is it possible to list the settings at all, other than the front panel? Thanks for the help. 73, Bob AD7Z This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
See page 45 and 46 Win4k3Suite Manual, Kev, VK5KS On 01-Apr-19 10:33 AM, Mark Musick wrote: Well, wait long enough or take to long thinking about it and someone who really knows the answer I gave will pop in and say "Yes, you can do that" before you do. HI Thanks Jim. I was pretty sure we could do that with Win4K3Suite. Have you done it? Mark, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Jim N7US Sent: Sunday, March 31, 2019 22:54 To: 'B.' ; elecraft@mailman.qth.net Subject: Re: [Elecraft] Possibly dumb question... VA2FSQ's Win4K3Suite can do that. https://va2fsq.com/ Jim N7US -Original Message- Hi Folks, I have been trying to find a way to "dump" or list out all the settings in my K3s for the MENU options as well as the settings for the CONFIG options without going through the front panel display and writing them all down. The reason is to be able to make the same settings on another K3s, again without having to sit and go through the settings one by one and write them down. I did use the K3s utility to make a configuration file and saved it but if I try to look at the file, I get what looks like gibberish and it is not easily interpreted. Maybe there is another program that can make the configuration file readable? Am I missing an easy way to do this? Is there something I have not found in the utility program that will do this? Is it possible to list the settings at all, other than the front panel? Thanks for the help. 73, Bob AD7Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
Well, wait long enough or take to long thinking about it and someone who really knows the answer I gave will pop in and say "Yes, you can do that" before you do. HI Thanks Jim. I was pretty sure we could do that with Win4K3Suite. Have you done it? Mark, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Jim N7US Sent: Sunday, March 31, 2019 22:54 To: 'B.' ; elecraft@mailman.qth.net Subject: Re: [Elecraft] Possibly dumb question... VA2FSQ's Win4K3Suite can do that. https://va2fsq.com/ Jim N7US -Original Message- Hi Folks, I have been trying to find a way to "dump" or list out all the settings in my K3s for the MENU options as well as the settings for the CONFIG options without going through the front panel display and writing them all down. The reason is to be able to make the same settings on another K3s, again without having to sit and go through the settings one by one and write them down. I did use the K3s utility to make a configuration file and saved it but if I try to look at the file, I get what looks like gibberish and it is not easily interpreted. Maybe there is another program that can make the configuration file readable? Am I missing an easy way to do this? Is there something I have not found in the utility program that will do this? Is it possible to list the settings at all, other than the front panel? Thanks for the help. 73, Bob AD7Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
Don't hold me to this, but I believe there is a way to do it if you have Win4K3Suite. Win4K3Suite can read the menu settings from a K3. Not the gain and compensation values, but the menu items we would typically like to have in more than one radio like RX EQ, TX EQ, AGC SLP, AGC THR etc. Win4K3Suite allows you to save those settings to a file to be reloaded into the K3 later. Once you have saved the menu settings, I would think you could shut down Win4K3Suite, disconnect the USB cable from K3 number one and connect it to the second K3, bring Win4K3Suite back up and load that menu settings file to the second K3. Then save the configuration of the second K3. I do have Win4K3Suite. I have not tried this. But it would be interesting to try. I'm sure someone more knowledgeable than me will be able to shoot a hole in my theory. Tom, the author of Win4K3Suite probably can give us the answer off the top of his head. Mark Musick, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Walter Underwood Sent: Sunday, March 31, 2019 23:08 To: Elecraft mail list Subject: Re: [Elecraft] Possibly dumb question... The config file includes compensation values for the devices in a specific radio. Loading it into a different radio would mean a serious realignment for that radio. This is a huge hole in the Elecraft utilities. It should be possible to save, load, and share the menu settings. I’ve lost count of the times someone has asked how to reset the rig to defaults and I’ve had to say “Sorry, can’t do it.” Even better, think about a checklist for which values you would save or load. Someone could share a file with TX EQ and compression settings, for example. Then separately, share AGC settings. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Mar 31, 2019, at 3:36 PM, Fred Jensen wrote: > > Sadly, I think the configuration files are keyed to the radio's serial > number. I believe one reason for this is the modular nature of Elecraft > equipment, and attempting to load a config file that includes modules the > target radio does not would probably lead to problems and lots of posts on > this list. [:-) Dick, of Elecraft Utility fame may be able to expound more > concisely on the subject. > > 73, > Fred ["Skip"] K6DGW > Sparks NV DM09dn > Washoe County > > On 3/31/2019 3:09 PM, Byron Servies wrote: >> You can use the K3 utility from Elecraft to save the configuration to >> a file and load it to the second radio. Perhaps that would do the trick. >> >> 73, Byron N6NUL >> >> On Sun, Mar 31, 2019 at 2:56 PM B. wrote: >> >>> Hi Folks, >>> >>> >>> >>> I have been trying to find a way to "dump" or list out all the >>> settings in my K3s for the MENU options as well as the settings for >>> the CONFIG options without going through the front panel display and >>> writing them all down. >>> >>> >>> >>> The reason is to be able to make the same settings on another K3s, >>> again without having to sit and go through the settings one by one >>> and write them down. I did use the K3s utility to make a >>> configuration file and saved it but if I try to look at the file, I >>> get what looks like gibberish and it is not easily interpreted. >>> Maybe there is another program that can make the configuration file >>> readable? >>> >>> >>> >>> Am I missing an easy way to do this? Is there something I have not >>> found in the utility program that will do this? Is it possible to >>> list the settings at all, other than the front panel? >>> >>> >>> >>> Thanks for the help. >>> >>> 73, >>> >>> Bob >>> >>> AD7Z >>> > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
VA2FSQ's Win4K3Suite can do that. https://va2fsq.com/ Jim N7US -Original Message- Hi Folks, I have been trying to find a way to "dump" or list out all the settings in my K3s for the MENU options as well as the settings for the CONFIG options without going through the front panel display and writing them all down. The reason is to be able to make the same settings on another K3s, again without having to sit and go through the settings one by one and write them down. I did use the K3s utility to make a configuration file and saved it but if I try to look at the file, I get what looks like gibberish and it is not easily interpreted. Maybe there is another program that can make the configuration file readable? Am I missing an easy way to do this? Is there something I have not found in the utility program that will do this? Is it possible to list the settings at all, other than the front panel? Thanks for the help. 73, Bob AD7Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
When in doubt, carefully done notes with lots of comments - kept in a notebook - does wonders. Not only does it give you a backup, it gives you explanations of why you did what. Bill W2BLC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
The config file includes compensation values for the devices in a specific radio. Loading it into a different radio would mean a serious realignment for that radio. This is a huge hole in the Elecraft utilities. It should be possible to save, load, and share the menu settings. I’ve lost count of the times someone has asked how to reset the rig to defaults and I’ve had to say “Sorry, can’t do it.” Even better, think about a checklist for which values you would save or load. Someone could share a file with TX EQ and compression settings, for example. Then separately, share AGC settings. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Mar 31, 2019, at 3:36 PM, Fred Jensen wrote: > > Sadly, I think the configuration files are keyed to the radio's serial > number. I believe one reason for this is the modular nature of Elecraft > equipment, and attempting to load a config file that includes modules the > target radio does not would probably lead to problems and lots of posts on > this list. [:-) Dick, of Elecraft Utility fame may be able to expound more > concisely on the subject. > > 73, > Fred ["Skip"] K6DGW > Sparks NV DM09dn > Washoe County > > On 3/31/2019 3:09 PM, Byron Servies wrote: >> You can use the K3 utility from Elecraft to save the configuration to a >> file and load it to the second radio. Perhaps that would do the trick. >> >> 73, Byron N6NUL >> >> On Sun, Mar 31, 2019 at 2:56 PM B. wrote: >> >>> Hi Folks, >>> >>> >>> >>> I have been trying to find a way to "dump" or list out all the settings in >>> my K3s for the MENU options as well as the settings for the CONFIG options >>> without going through the front panel display and writing them all down. >>> >>> >>> >>> The reason is to be able to make the same settings on another K3s, again >>> without having to sit and go through the settings one by one and write them >>> down. I did use the K3s utility to make a configuration file and saved it >>> but if I try to look at the file, I get what looks like gibberish and it is >>> not easily interpreted. Maybe there is another program that can make the >>> configuration file readable? >>> >>> >>> >>> Am I missing an easy way to do this? Is there something I have not found in >>> the utility program that will do this? Is it possible to list the settings >>> at all, other than the front panel? >>> >>> >>> >>> Thanks for the help. >>> >>> 73, >>> >>> Bob >>> >>> AD7Z >>> > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
Sadly, I think the configuration files are keyed to the radio's serial number. I believe one reason for this is the modular nature of Elecraft equipment, and attempting to load a config file that includes modules the target radio does not would probably lead to problems and lots of posts on this list. [:-) Dick, of Elecraft Utility fame may be able to expound more concisely on the subject. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County On 3/31/2019 3:09 PM, Byron Servies wrote: You can use the K3 utility from Elecraft to save the configuration to a file and load it to the second radio. Perhaps that would do the trick. 73, Byron N6NUL On Sun, Mar 31, 2019 at 2:56 PM B. wrote: Hi Folks, I have been trying to find a way to "dump" or list out all the settings in my K3s for the MENU options as well as the settings for the CONFIG options without going through the front panel display and writing them all down. The reason is to be able to make the same settings on another K3s, again without having to sit and go through the settings one by one and write them down. I did use the K3s utility to make a configuration file and saved it but if I try to look at the file, I get what looks like gibberish and it is not easily interpreted. Maybe there is another program that can make the configuration file readable? Am I missing an easy way to do this? Is there something I have not found in the utility program that will do this? Is it possible to list the settings at all, other than the front panel? Thanks for the help. 73, Bob AD7Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possibly dumb question...
You can use the K3 utility from Elecraft to save the configuration to a file and load it to the second radio. Perhaps that would do the trick. 73, Byron N6NUL On Sun, Mar 31, 2019 at 2:56 PM B. wrote: > Hi Folks, > > > > I have been trying to find a way to "dump" or list out all the settings in > my K3s for the MENU options as well as the settings for the CONFIG options > without going through the front panel display and writing them all down. > > > > The reason is to be able to make the same settings on another K3s, again > without having to sit and go through the settings one by one and write them > down. I did use the K3s utility to make a configuration file and saved it > but if I try to look at the file, I get what looks like gibberish and it is > not easily interpreted. Maybe there is another program that can make the > configuration file readable? > > > > Am I missing an easy way to do this? Is there something I have not found in > the utility program that will do this? Is it possible to list the settings > at all, other than the front panel? > > > > Thanks for the help. > > 73, > > Bob > > AD7Z > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- - Northern California Contest Club - CU in the Cal QSO Party 5-6 Oct 2019 - www.cqp.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Possibly dumb question...
Hi Folks, I have been trying to find a way to "dump" or list out all the settings in my K3s for the MENU options as well as the settings for the CONFIG options without going through the front panel display and writing them all down. The reason is to be able to make the same settings on another K3s, again without having to sit and go through the settings one by one and write them down. I did use the K3s utility to make a configuration file and saved it but if I try to look at the file, I get what looks like gibberish and it is not easily interpreted. Maybe there is another program that can make the configuration file readable? Am I missing an easy way to do this? Is there something I have not found in the utility program that will do this? Is it possible to list the settings at all, other than the front panel? Thanks for the help. 73, Bob AD7Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
